3500/22M 138607-02 M Series Monitor – bently

The provided text outlines considerations related to static data, dynamic signal options, agency approvals, rack mounting options, power supplies, and switches in the context of the 3500 Monitoring System. Here is a summary:

Static Data Considerations:

• Static Data Port Access:
  • Each static data port can access six monitor slots in the 3500 rack.
  • Each monitor slot in the 3500 rack is limited to 32 PPLs.

Dynamic Signal Option:

• Identification of Monitors Providing Dynamic Data:
  • Specifies which monitors provide dynamic data to the DYNAMIC connectors on the Data Manager I/O Module.
  • Defines how the 3500 rack provides machinery data to Communication Processors (TDIX or DDIX).
  • Dynamic Port 2 is always assigned to slots 8 through 13.
  • No data is returned if a slot contains something other than a monitor.
  • No data can be returned from modules installed in slots 14 and 15.

Agency Approvals:

• Available Approvals:
  • None
  • CSA-NRTL/C
  • CE Approval (select if applicable to the rack’s installation)

Rack Mounting Option:

• Selection of Rack Type:
  • Choose the type of 3500 rack installed or to be installed.
  • Reference the 3500 Monitoring System Rack Installation and Maintenance Manual for descriptions of mounting options.

Power Supply:

• Options for Power Supplies:
  • Upper Position in Slot:
    • No Power Supply
    • AC High Voltage
    • AC Low Voltage
    • DC High Voltage
  • Lower Position in Slot (Same options as upper position)

Switches:

3.2 Switches

3.2.1 Software Switches:

• Configuration Mode:
  • A software switch in the Rack Interface Module.
  • Temporarily inhibits monitor and channel functions.
  • Can be set on the Software Switches screen under the Utilities Option on the main screen of the Rack Configuration Software.

This information provides an overview of key considerations and options related to static and dynamic data, agency approvals, rack mounting, power supplies, and software switches in the 3500 Monitoring System. Users should refer to the relevant manuals for detailed operational instructions.