106M1081-01 BENTLY Ethernet module motion control module

Product name:106M1081-01 BENTLY Ethernet module motion control module

Product model:106M1081-01

Quantity: inventory

Warranty: We provide warranty service for 106M1081-01

Shipping Port:FuJian

Product technical documents: no relevant documents

Category:
Whatsapp:+86 13313705507
WeChat:+86 13313705507
E-mail:geabbdcs@gmail.com
Contacts:KEN HE

Description

106M1081-01 For TMR applications, the 3500 system requires a TMR version of the RIM. In

addition to all the standard RIM functions, the TMR RIM also performs “monitor

channel comparison.” The 3500 TMR configuration executes monitoring voting

using the setup specified in the monitor options. Using this method, the TMR RIM

continually compares a specified output of 3 redundant monitors. If the TMR RIM

detects that the information from one of those monitors is no longer equivalent

(within a configured percent) to the remaining two, 106M1081-01 it will flag the monitor as being

in error and place an event in the System Event List.

 

brand Product Name Product model Order No
BENTLY modular 106M1081-01 nothing
Place of Origin Marketable land Imported or not defects liability period
Europe and America Nationwide and overseas yes a year
Place of shipment Delivery method How to use Applicable industries
Xiamen Shunfeng Express Commissioning and installation Power Plant Steel Plant Cement Plant Shipboard Papermaking
Service advantages Foreign import, goods preparation and supply Reasonable price and reliable quality Pictures are for reference only
Product features Primary source of goods, supply by model After sales guarantee Chen 1806092-3929

 

106M1081-01 This indicates if the Rack Interface Module is functioning correctly. A not OK

status is returned under any of the following conditions:

  • Hardware Failure in the module
  • Communication Failure with any module
  • If any of the following security options have been configured and their

conditions met:

106M1081-01 Rack Address is changed while the RIM is in Run Mode.

A module was inserted into or removed from the rack.

The Key Switch was changed from Run to Program Mode.

  • Node Voltage Failure
  • OK Relay coil check Failed

If the Module OK status goes not OK then the system OK Relay on the Rack

Interface I/O Module will be driven not OK.

Configuration Fault

This indicates if the Rack Interface Module configuration is invalid.

Channel Status

OK

106M1081-01 This indicates whether or not a fault has been detected on the channel or

within the module. If the Channel OK status goes not OK then the system OK

Relay on the Rack Interface I/O Module will be driven not OK.

OK: Indicates that the Rack Interface Module and the I/O modules are operating

correctly.

2) TX/RX: Flashes at the rate that messages are sent.

3) TM: Indicates whether the rack is in the Trip Multiply mode.

4) Config OK: Indicates any of the following:

  • Any module has a configuration error or is unconfigured.
  • Stored configuration of the Rack Interface Module does not match the

physical configuration of the rack.

  • Security option condition was not met.
  • 106M1081-01 This section describes how the Rack Interface Module is configured using theRack Configuration Software. It also describes any configuration considerationsassociated with this module. Refer to the 3500 Monitoring System RackConfiguration and Utilities Guide and the Rack Configuration Software for thedetails on how to operate the software.

    3.1 Software Configuration Options

    This section shows the configuration screens of the Rack Configuration Software

    that are associated with the Rack Interface Module and discusses the

    configuration considerations. It will show a copy of the software screen and will

    explain the options that are available.

    3.1.1 Rack Interface Module Configuration Considerations

    The Rear Port I/O option and the Power Supply option specified on the Rack

    Interface Module option screen must match the physical components of the

    system. If a configuration mismatch is found, the rack will not accept the

    downloaded configuration

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

 

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 180 6092 3929
Mail: 2235954483@qq.com
Contact: Chen