Description
USB-6363 Digital Multimeter Device NI 6363
USB-6363 Digital Multimeter Device NI 6363
Title: National Instruments USB-4065 Digital Multimeter Device: Precision Measurements and Versatile Testing
1. Introduction: The National Instruments USB-4065 is a state-of-the-art Digital Multimeter Device designed to meet diverse measurement and testing needs. Available with part numbers 780152-01 and 196824G-01L, the USB-4065 offers precise measurements for voltage, current, resistance, and diode testing.
2. Key Features:
- Measurement of AC and DC values.
- 6.5 digits of resolution for accurate readings.
- USB 2.0 bus connector supporting High-Speed or Full-Speed USB interface.
- Sampling data at a maximum rate of 3 kS/s.
- Input voltage range: 4.5 V to 5.25 V.
- Inrush current: 500 mA, operating current: 400 mA.
- Input and output triggers with logic levels of 5 V TTL, LVTTL (input) and 3.3 V (output).
- Maximum trigger rate: 2.5 kHz.
3. Frequently Asked Questions:
Question: What does the USB-4065 support?
- Answer: The USB-4065 supports both Hi-Speed and full-speed USB protocol.
Question: What is the fuse rating for the USB-4065?
- Answer: The fuse of the USB-4065 has a rating of F 3.15 A 250 V.
Question: What type of fuse does the USB-4065 have?
- Answer: The USB-4065 has a Fast-Acting fuse.
4. Specifications:
Definitions:
- Warranted specifications: Covered by the model warranty and describe the performance of the device under stated operating conditions.
- Characteristics: Relevant values to the device’s use under specified conditions but not covered by the model warranty.
- Typical specifications: Performance met by a majority of models.
- Nominal specifications: Attributes based on design, conformance testing, or supplemental testing.
Conditions:
- Specifications are valid under ambient temperature (Tcal ± 5 °C).
- Calibration interval of 1 year.
- Warm-up time of 50 minutes.
- niDMM Digits Resolution property set to 6.5.
- niDMM Aperture Time Units property set to Power Line Cycles.
- niDMM Aperture Time property set to 10.
DC Specifications
Resolution (digits) | Reading rate (S/s), specified for 60 Hz (and 50 Hz) operation | Aperture time (NPLC) | RMS noise (ppm of range), 10 V range |
---|---|---|---|
6½ | 0.6 (0.5) | 100 | 0.06 |
6 (5) | 10 | 0.2 | |
10 (8.33) | 6 | 0.25 | |
5½ | 30 (25) | 2 | 0.4 |
60 (50) | 1 | 0.55 | |
900 | 0.06 | 1.7 | |
1,500 | 0.04 | 2.5 | |
4½ | 3,000 | 0.02 | 11.5 |
5. Conclusion: The National Instruments USB-4065 Digital Multimeter Device provides unparalleled precision and versatility for measurement and testing applications. With a robust set of features and specifications, it ensures reliable and accurate results across various scenarios.