PACIFIC SCIENTIFIC R43HCNA-R2-NS-VS-00 Application Industrial Control

Description

PACIFIC SCIENTIFIC R43HCNA-R2-NS-VS-00 Application Industrial Control

PACIFIC SCIENTIFIC R43HCNA-R2-NS-VS-00 Application Industrial Control

Dangerous voltages, resulting from cable capacitance, exists on some cable shields if the shields are not connected to PE ground. Proper grounding of shields is also required to reduce radiated and conducted emissions as well as to protect against susceptibility to external and self generated noise. Follow these shielding requirements carefully:

• The drive end of the motor cable shield must be connected to the PE or location on the TB1 connector. The shield must also be clamped to the ground plane as described above. If cable with a separate inner foil shield and outer braided shield is used (Pacific Scientific CE cables for example), connect the foil shield to the PE or location on the TB1 connector and clamp the outer braided shield to the ground plane. If the leads for a motor holding brake are run with the motor leads, the holding brake leads must be separately shielded and the shield connected to the PE or location on the TB1 connector.

• The resolver cable should have inner shields around each twisted pair as well as an overall outer braided shield. The inner shields should be connected to J3 pin 5 while the outer shield should be clamped to the ground plane.

• The control leads to the J2 connector should have an outer braided shield with the shield terminated through a conductive shell or clamped to the ground plane.

• When using an external regen resistor, if regen cabling is accessible during normal machine operation, regen resistor cable should be rated at 450 VDC and shielded with shield connected to PE.

Recommended products:
4C2000.01-510
4C2200.01-110
4D1022.00-090
4D1084.00-090
4D1164.00-090
4D1164.00-590
4D1166.0-490
4D1166.0-590
4D33900G19
4D33942G01
4DP7APXOA311
4E0010.01-090
4E0011.01-090
4E0011.01-90
4E0020.01-090
4E0021.01-90
4MP281.0843-K01
4P0420.00-490
4P0420.00-K08
4P3040.00-490
4P3040.00 K32
4P3040.01-490
4P3040.01-K06
4PP015.0420-36
4PP015.E420
4PP015.E420-01
4PP015.E420-K01
4PP035.0300-01
4PP035.E300-01
4PP045.0571-042
4PP045.0571-062
4PP045.0571-K09
4PP045.0571-K24
4PP045.0571-K32
4PP065.0351-P74
4PP065.0571-K01
4PP065.0571-K02
4PP065.0571-K37
4PP065.0571-K53