GE IS200VAICH1A IS200VAICH1B VME analog input card

Description

GE General Electric Technical Specifications: IS200VAICH1A

The 750 and 760 provide the user with two rear communication ports which may be used simultaneously. Both

IS200VAICH1A support a subset of the AEG Modicon Modbus protocol as well as the Harris Distributed Network Protocol

(DNP) as discussed in the communications chapter. Through the use of these ports, continuous monitoring

and control from a remote computer, SCADA system or PLC is possible.

The first port, COM1, can be used in a two wire RS485 mode or a four wire RS422 mode, but will not operate

IS200VAICH1A in both modes at the same time. In the RS485 mode, data transmission and reception are accomplished over a

single twisted pair with transmit and receive data alternating over the same two wires. These wires should be

connected to the terminals marked RS485. The RS422 mode uses the COM1 terminals designated as RS485

for receive lines, and the COM1 terminals designated as RS422 for transmit lines. The second port, COM2, is

intended for the two wire RS485 mode only.

To minimize errors from noise, the use of shielded twisted-pair wire is recommended. Correct polarity should

IS200VAICH1A also be observed. For instance, SR type relays must be connected with all B1 terminals (labeled COM1 RS485

+) connected together, and all B2 terminals (labeled COM1 RS485 –) connected together. Terminal B3 (COM1

RS485 COM) should be connected to the common wire inside the shield. To avoid loop currents, the shield

should be grounded at one point only. Each relay should also be daisy-chained to the next one in the link. A

maximum of 32 devices can be connected in this manner without exceeding driver capability. For larger sys

tems, additional serial channels must be added. It is also possible to use commercially available repeaters to

add more than 32 relays on a single channel. Star or stub connections should be avoided entirely.

Lightning strikes and ground surge currents can cause large momentary voltage differences between remote

ends of the communication link. For this reason, surge protection devices are internally provided at both com

munication ports. An isolated power supply with an optocoupled data interface also acts to reduce noise cou

pling. To ensure maximum reliability, all equipment should have similar transient protection devices installed.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the de

livery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen