Device controller P0916CA FOXBORO

Description

For TAs which provide group isolation (P0916CA, P0916CB, P0916PW, P0916PX and P0916XZ), input channels are group isolated from earth (ground). For details, refer to the I/A Series DIN Rail Mounted Subsystem User’s Guide (B0400FA). These module/TA combinations can withstand, without damage, a potential of 600 V ac applied for one minute between the group isolated channels and earth (ground).

PLC is an industrial control equipment, and although many measures have been taken in terms of reliability, the working environment still has a significant impact on PLC. Therefore, regular inspections of the PLC should usually be conducted every six months. If the working conditions of the PLC do not meet the standards specified in Table 1, some emergency measures need to be taken to ensure that the PLC operates in the specified standard environment.
Inspection items and contents
AC power supply

1. Voltage
2. Installation conditions
Is the basic unit and expansion unit securely installed
Are the connecting cables between the basic unit and expansion unit fully plugged in
Is the wiring screw loose
The installation screws must be tightened
The connecting cable should not be loose
The connecting screws cannot be loosened
External wiring should not have any appearance abnormalities
environment condition
Temperature/humidity/vibration/dust
Are the temperature and humidity within the corresponding range? When the PLC is installed on the dashboard, the temperature of the dashboard can be considered as the ambient temperature of the PLC. The relative humidity of p6 is below 85%, the amplitude is less than, and there is no large amount of dust, salt, or iron filings
Stability
1. Measure whether the voltage applied to the PLC is the rated value
2. Does the voltage power supply experience frequent and rapid changes
1. The power supply voltage must be within the working voltage range
2. The fluctuation of power supply voltage must be within the allowable range

IS215ACLEH2A
IS215ACLEH1C
IS215ACLEH1BCB
IS215ACLEH1BB
IS215ACLEH1B
IS215ACLEH1AB
IS215ACLEH1A
IS215ACLAH1AL
IS215ACLAH1AD
IS215ACLAH1A
IS210WSVOH1AE
IS210SAMBH2AA
IS210MVRCH1A
IS210ERGTH1A
IS210DTURH1AA
IS210DTTCH1AA
IS210DTRTH1AA
IS210DTCIH1AA
IS210DTCIH1A