Ensure the YPH105E is placed on a stable, flat, and dry surface, away from direct sunlight, high temperatures, humidity, or corrosive substances.
Check the power supply: Confirm that the input voltage matches the rated voltage of YPH105E (as indicated on the product nameplate).
Inspect the equipment appearance and connections:
Check for any visible damage to the casing, cables, or interfaces (e.g., cracks, loose wires).
If the equipment requires external accessories (e.g., sensors, sample holders, or data cables), ensure they are correctly and securely connected to the corresponding ports.
Turn on the main power switch (usually labeled “Power” or marked with “I/O”) and wait for the equipment to initialize. The indicator light should display a steady green (or the specified normal color) to indicate successful startup.
2. Basic Operation Steps
Step 1: Select Operation Mode
On the control panel (or touchscreen, if equipped), press the “Mode” button to cycle through available operation modes (e.g., “Standard Mode”, “Calibration Mode”, “Custom Mode”).
Use the “Up/Down” arrow keys or touchscreen to select the desired mode, then press “Confirm” to confirm the selection.
Step 2: Set Operation Parameters
After selecting the mode, the screen will display parameter setting options (e.g., temperature, pressure, time, speed, or sample volume).
For each parameter:
Navigate to the parameter using the arrow keys or touchscreen.
Input the target value using the numeric keypad or by adjusting the dial (if applicable).
Press “Save” or “Enter” to confirm each parameter setting.
After setting all parameters, review the values on the screen to ensure they are correct.
Step 3: Start the Operation
Confirm that the equipment is in a safe state (e.g., no obstacles in the working area, safety covers closed if required).
Press the “Start” button (usually highlighted in blue or green) to initiate the operation. The equipment will begin running according to the set parameters, and the screen will display real-time operation status (e.g., current parameter values, remaining time).
Step 4: Monitor the Operation Process
During operation, regularly check the equipment’s running status:
Observe the indicator lights (avoid abnormal colors like flashing red, which may indicate errors).
Monitor the real-time data on the screen to ensure parameters remain within the set range.
Do not open safety covers, disconnect accessories, or adjust parameters arbitrarily during operation (unless the equipment allows real-time adjustment and it is necessary for the process).
3. Post-Operation Shutdown & Maintenance
After the operation is completed (the screen will display “Operation Finished” or the indicator light turns yellow), press the “Stop” button to halt the equipment.
If the equipment processes samples (e.g., laboratory instruments), carefully remove the samples or materials according to safety guidelines (wear gloves if needed to avoid burns or contamination).
Turn off the main power switch, then disconnect the power cable from the power outlet (if the equipment will not be used for a long time).
Clean the equipment:
Wipe the outer casing with a soft, dry cloth. For stains, use a mild, non-corrosive cleaning agent (avoid spraying liquid directly on the control panel or interfaces).
Clean internal components (e.g., sample chambers, nozzles) as instructed in the product manual (do not use sharp tools to avoid scratches).
Record the operation log (if required): Note down the operation time, parameters used, and any abnormal conditions encountered.
Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.
Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.
Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!
E-mail:geabbdcs@gmail.com
WhatsApp:+86 13313705507
Wechat:+86 13313705507
Phone:+86 13313705507
Twitter:@Bella_abbdcs
Telegram:+86 13313705507
Skype:live:.cid.4563d9d89ae553bce