Name: XVC-601-GTI-10-V1-000 Operator Panel Interface
Price: 6333 CNY
Availability: InStock

Description

XVC-601-GTI-10-V1-000 Operator Panel Interface

The CPU board contains the microprocessor and RAM memory, a real-time clock, LED indicators, INIT push button, and a CompactFlash interface.The base plate of the XVC-601-GTI-10-V1-000 controller has two RJ45 Ethernet ports (CN1, CN2) for connection to the Control Network, and two RJ45 serial ports (COM3, COM4). One of the serial ports (COM3) is an XVC-601-GTI-10-V1-000 port with modem control signals, whereas the other port (COM4) is isolated and used for the connection of a configuration tool. The controller supports CPU redundancy for higher availability (CPU, CEX-Bus, communication interfaces and S800 I/O).Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism. All base plates are provided with a unique Ethernet address which provides every CPU with a hardware identity. The address can be found on the Ethernet address label attached to the TP830 base plate.

XVC-601-GTI-10-V1-000 Operator Panel Interface

Neither R(un) nor F(ault) LEDs are ON
The CI871 unit is in the process of configuration. If the condition persist, and no other unit LED on the CEX-Bus is ON:
• Check that a valid hardware configuration including the XVC-601-GTI-10-V1-000 is downloaded to the controller.
• Check the CEX-Bus fuse inside the PM8xx processor unit.
• Initiate a reset signal (INIT) from the PM8xx processor unit.
• Replace the XVC-601-GTI-10-V1-000 unit

XVC-601-GTI-10-V1-000 Operator Panel Interface

The XVC-601-GTI-10-V1-000 processor unit has performance data which is approximately 0.5 times the performance of PM862. In redundant configuration the execution performance is somewhat lower than in single configuration.Switch over time from Primary CPU to Backup CPU, in redundant configuration, is less than 10 ms.Simple DIN rail attachment / detachment procedures, using the unique slide & lock mechanism. All base plates are provided with a unique Ethernet address which provides every CPU with a hardware identity. The address can be found on the Ethernet address label attached to the TP830 base plate.

XVC-601-GTI-10-V1-000 Operator Panel Interface

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!