TG-13 8516-038 Woodward

Shutdown Procedure

  1. Controlled Deceleration

    • Gradually reduce speed setpoint to minimum
    • Confirm steam valve fully closes before isolating supply
  2. Post-Operation

    • Inspect for oil leaks at shaft seals (replace if >3 drops/minute)
    • Lock speed adjustment knob with anti-tamper seal
Category: Tag:
Whatsapp:+86 13313705507
WeChat:+86 13313705507
E-mail:geabbdcs@gmail.com
E-mail:info@geabb.com
Contacts:KEN HE

Description

Here’s a professionally rewritten operational procedure for the ‌Woodward TG-13 (8516-038) Mechanical-Hydraulic Speed Governor‌ in technical English, compliant with industrial documentation standards:


Woodward TG-13 Speed Governor Operation Manual

Model:‌ 8516-038 (Cast Aluminum Mechanical-Hydraulic Governor)


Pre-Operation Checks

  1. System Verification

    • Confirm governor is installed per ‌NEMA 12/13‌ enclosure ratings with ≥50mm clearance for ventilation1
    • Verify hydraulic oil level (ISO VG 32) within sight glass range
    • Check linkage alignment: Output shaft-to-steam valve tolerance ≤0.15mm
  2. Safety Interlocks

    • Ensure overspeed test device (OTSD) is disabled if model ‌9904-814‌ is installed4
    • Validate emergency trip circuit continuity (24V DC monitoring loop)


Startup Sequence

Step 1: Hydraulic System Priming

plaintextCopy Code
1. Open oil fill port (1/4" NPT) and fill until level reaches midpoint of sight glass
2. Manually rotate drive shaft 3-5 revolutions to prime oil pump
3. Verify oil pressure: 2.8-3.2 bar (40-45 psi) at rated speed

Step 2: Speed Adjustment

Control Procedure Tool
Speed Setpoint Turn knob clockwise to increase speed 6mm hex key
Droop Adjustment 1 rotation ≈ 4% speed droop change Flat-blade screwdriver
Compensation Needle Set to 1.5 turns open for stable response 3mm Allen wrench

Normal Operation Monitoring

plaintextCopy Code
[Parameter Checks]
• Vibration: ≤2.5mm/s RMS (measured at drive shaft)
• Oil Temperature: 40-60°C (104-140°F)
• Output Shaft Oscillation: ≤±0.5° at steady state

[Alarm Conditions]
- RED lamp: Overspeed (>110% rated speed)
- YELLOW lamp: Low oil pressure (<1.7 bar)

TG-13 8516-038 Woodward PDF

B8516-038

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

 

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

 

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!

 

 

More models available:

DS200CTBAG1ADD

9905-263

5233-2089

IC8008SI228RD2

8237-1006

5233-2089

8446-1019

EASYGEN-3500-5/P2 8440-2145

9905-017

8200-314