Name: SERVOSTAR 310 KOLLMORGEN 310 Servo Controller new
Price: 2654 CNY
Availability: InStock

Description

SERVOSTAR 310 Standard Version

Two voltage classes with a broad nominal voltage range:
- 1 x 110V-10% … 3 x 230V+10% (SERVOSTAR 303-310, S3xx6)
- 3 x 208V-10% … 3 x 480V+10% (SERVOSTAR 341-346, S3xx0)
Direct shielding connection on the servo amplifier
Two onboard analog inputs
Onboard CANopen (default: 500 kBaud) for integration into CAN-bus systems and parameter setting for multiple drives via one amplifier’s PC interface
Dedicated slot for an expansion card
Onboard RS232 and pulse-direction interface
Onboard restart lock -AS- for personnel safety (see p. 36)
Onboard intelligent position controller
Multi-feedback support
Compatible with synchronous servomotors, linear motors, asynchronous motors, high-frequency spindles, and DC motors

SERVOSTAR 310 Power Section

Direct connection to grounded 3-phase supply: 110V-10% or 230V-10% up to 480V+10%
- TN-network or TT-network with grounded neutral point (max. 42kA symmetrical current rating); connection to other supply types only via isolating transformer (see p. 58)
B6 bridge rectifier, integrated supply filter, and soft-start circuit
Single-phase supply operation possible (e.g., for setup)
User-provided fusing (e.g., fusible cutout)
Shielding: All shielding connections made directly on the amplifier
Output stage: IGBT module with floating current measurement
Brake circuit with dynamic distribution of regenerated power across multiple amplifiers on the same DC bus link
- Internal brake resistor as standard; external brake resistors available if required
DC bus link voltage: 135 … 450 V DC or 260 … 900 V DC (parallel connection supported)
Integrated interference suppression filters for electrical supply feed and 24V auxiliary supply voltage
- Complies with EN 61800-3: C2 for motor cables ≤10m; C3 for motor cables >10m

SERVOSTAR 310 Integrated Safety

Appropriate insulation/creepage distances and electrical isolation ensure safe separation between power input/motor connections and signal electronics (per EN 61800-5-1)
Soft-start, overvoltage detection, short-circuit protection, and phase-failure monitoring
Temperature monitoring for the servo amplifier and motor (when using our motors and prefabricated cables)

SERVOSTAR 310 Auxiliary Supply Voltage (24V DC)

Electrically isolated with internal fusing
Powered by an external 24V DC power supply unit (e.g., with isolating transformer or uninterruptible power supply)

SERVOSTAR 310 Operation and Parameter Setting

Setup via user-friendly software through a PC’s serial interface
Direct operation (without PC) via two keys on the servo amplifier and a 3-character LED display
Fully programmable via the RS232 interface

SERVOSTAR 310 PDF
SERVOSTAR 310

♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!