S70362-PBNANA Kollmorgen S700 Servo Drive ORIGINAL

Description

UL Certification Overview

• Certified Models: S7xx0 servo amplifiers (UL file number: E217428)
• Non-Certified Models: S7xx6 servo amplifiers (not listed under UL)
• UL Standards Compliance:
  • UL 840: Specifies air and insulation creepage spacings for electrical equipment and printed circuit boards.
  • UL 508C: Defines minimum design requirements for electrically operated power conversion equipment (e.g., frequency converters, servo amplifiers) to mitigate fire, electric shock, and personal injury risks.
• Certification Scope: Applies only to the device’s mechanical and electrical construction.
• Validation Process: Technical conformance to U.S. standards is verified by independent UL inspectors via type testing and regular checkups.
• Customer Obligation: No additional UL-specific requirements beyond the installation and safety notes in the documentation.
• 

UL Marking Requirements

• Wire Specifications:
  • Copper wire only (60°C or 75°C rated).
  • Class 1 wire only.
• Terminal Tightening Torque:
  • X0, X8, X9 terminals: 0.7 – 0.8 Nm (6.20 to 7.08 lbf·in)
• Environmental Rating: For use in pollution degree 2 environments.
• Protection Features:
  • Solid state motor overload protection (triggers at 130% of full load current).
  • Integral solid state short circuit protection (does NOT provide branch circuit protection).
  • Branch circuit protection must comply with the National Electrical Code (NEC) and local codes.
  • No motor over-temperature sensing included.
• Circuit Capability: Suitable for circuits delivering max. 42kA rms symmetrical amperes (at 480 Vac max voltage).

Supply Circuit Protection

Common Bus Connection

• Drives may be connected via the “common bus” (DC bus link) per instructions on p. 66ff.
• AC input side grouping is allowed based on the max. input fuse (e.g., 3 x S7010 with one common 6A time-delay fuse).
• Important Note: The servo amplifiers are tested in a defined configuration with system components described in this documentation. Any deviation from the specified configuration/installation requires the customer to conduct new measurements for regulatory compliance.
• 

EU Directive Conformance

• EC Machinery Directive (2006/42/EC)
• EC EMC Directive (2004/108/EC)
• EC Low Voltage Directive (2006/95/EC)

EMC Performance

• Noise Immunity: Complies with 2nd environmental category (industrial environment).
• Noise Emission:
  • Category C2 (motor cable < 10m).
  • Category C3 (motor cable ≥ 10m).

S70362-PBNANA PDF

♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!

More models available：

DS200CTBAG1ADD

9905-263

5233-2089

IC8008SI228RD2

8237-1006

5233-2089

8446-1019

EASYGEN-3500-5/P2 8440-2145

9905-017

8200-314