Description

SERVOSTAR S4036M-PB Digital Servo Amplifiers

Minimum Complexity

Up to 8 axes in a single system
Only one power supply feed and one auxiliary voltage supply per system
Shield connection directly on the servo amplifier
All axes in a system can be parameterized through a single interface
Strongly reduced wiring expenditure by modular structure
Simple mechanical structure on DIN rails
Compatible with synchronous servomotors, linear motors and asynchronous motors

Standard Version

2 supply voltage versions:
- SERVOSTAR 40xM: Up to 3x230VAC
- SERVOSTAR 44xM: Up to 3x400VAC
Overvoltage category III acc. to EN 61800-5-1
One size for master modules and axis modules respectively (see page 39)
Integrated analog input
Integrated fieldbus interface (standard: CANopen)
Integrated RS232 interface
Integrated pulse-direction interface

Supply Power

Directly from electrical supply input (master only, B6 rectifier bridge, integral power input filter and inrush circuit):
- 1 x 115V AC (SERVOSTAR 40xM only, unearthed operation permitted)
- 3 x 115V AC (SERVOSTAR 40xM only, unearthed operation permitted)
- 1 x 230V AC (SERVOSTAR 40xM only, unearthed operation permissible)
- 3 x 230V AC (all types, unearthed operation permissible)
- 3 x 400V AC (SERVOSTAR 44xM only, TN-system or TT-system with earthed neutral point)
Fusing (e.g., fusible cutout) to be provided by the user
Integrated interference suppression filter for supply input (category 2)
Integrated interference suppression filter for 24V auxiliary supply (category 2)
All shielding connections directly on the amplifier
Output stage: IGBT module with isolated current measurement
Clock frequency switchable from 8 to 16 kHz via ASCII command (with power reduction – contact customer support)
Brake circuit: Internal brake resistor as standard; external brake resistor optional
DC Bus link voltage:
- SERVOSTAR 40xM: 160…320V DC
- SERVOSTAR 44xM: 320…560V DC
- SERVOSTAR 4xxA: 160…560V DC

Integrated Safety

Safe electrical separation to IEC 61800-5-1 between power input/motor connections and signal electronics (via appropriate creepage distances and complete electrical isolation)
Soft-start, overvoltage detection, short-circuit protection, phase-failure monitoring
Temperature monitoring of servo amplifier and motor (when using our motors with pre-assembled cables)

Auxiliary Voltage

24V DC, electrically isolated via an external 24V DC PSU (e.g., with isolating transformer)

Operation and Parameter Setting

Via comfortable setup software, through a PC’s serial interface connected to a single port for all axes in a system
Station address setting via two keys and a 3-digit LED status display on the master
Fully programmable via RS232 interface

Completely Digital Control

Digital current controller (space vector pulse-width modulation, 62.5 µs)
Freely programmable digital speed controller (62.5 µs or 250 µs)
Integral position controller with application-specific adaptation options (250 µs)
Integrated pulse-direction interface for connecting a servomotor to a stepper-motor control
Evaluation of resolver signals or sine/cosine signals from a high-resolution encoder
Encoder emulation (incremental ROD-426 compatible or SSI)

S4036M-PB PDF
S4036M-PB

♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!