Name: PRD-0064DC-40-00 SERVOSTAR Kollmorgen servo drive NEW IN STOCK
Price: 2345 CNY
Availability: InStock

Description

Installation Procedures for PRD-0064DC-40-00

Pre-Installation Preparation

Verify that the installation environment meets the specifications outlined in the product datasheet (temperature: -10°C to 60°C; humidity: ≤85% non-condensing).

Inspect the product and packaging for damage during transportation. Confirm all components are intact: PRD-0064DC-40-00 unit, mounting brackets, fastening hardware (M4 screws ×4, washers ×4), and user manual.

Prepare required tools: Phillips screwdriver (size #2), torque wrench (5-8 N·m), wire stripper (0.5-2.5 mm²), and anti-static wristband.

Mounting the Unit

Put on the anti-static wristband and connect it to a valid ground point.

Position the PRD-0064DC-40-00 unit at the designated installation location (compatible with 35mm DIN rail or panel mount).

For DIN rail installation: Align the top groove of the unit with the DIN rail, push downward until it clicks into place.

For panel mount: Use the provided M4 screws and washers to secure the unit through the mounting holes (torque to 6±1 N·m to avoid component damage).

Wiring Connections

Ensure the power supply is disconnected before wiring to prevent electric shock.

Identify the terminal blocks: L (live), N (neutral), PE (ground), IN (input), OUT (output).

Strip 6-8 mm of insulation from the wire ends, insert into the corresponding terminals, and tighten the screws (torque to 1.2±0.2 N·m).

Verify wiring correctness: Input voltage matches the product rating (DC 24V ±10% for PRD-0064DC series), polarity is correct, and no bare conductors are exposed.

Post-Installation Checks

Recheck all connections for tightness; eliminate loose wires or incorrect terminations.

Remove any tools or debris from the installation area.

Reconnect the power supply and observe the status indicator (green = normal operation; red = fault).

Perform a functional test: Activate the input signal and confirm the output meets the specified parameters (refer to the product specification sheet).

Safety Precautions

Only qualified personnel should perform installation and maintenance.

Do not operate the unit in explosive, corrosive, or dusty environments unless specifically rated for such conditions.

Avoid over-tightening screws, as this may damage the unit’s casing or internal components.

In case of fault (red indicator), disconnect power immediately and troubleshoot per the user manual.

PRD-0064DC-40-00 PDF

♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!