PMC422 ABACO Controller PMC Card

Description

Abaco PMC422 Introduction & Technical Specifications
Basic Information
Brand: Abaco Systems (Ramix, GE Intelligent Platforms subsidiary brand)
Model: PMC422
Official Full Name: PMC422 Eight-Port RS232/RS422/RS485 Serial Controller PMC Card
Place of Origin: United States
International 6-digit HS Customs Code: 854231
China 10-digit extended customs code: 8542319090
Common factory part numbers: 14-2170D00, CY-110290

Mechanical Parameters
Standard PMC overall dimension: 149mm (length) × 74mm (width) × 12mm (board thickness)
Net weight of single card: 0.45kg
Installation specification: standard PMC mezzanine card embedded installation, compatible with all industrial SBC with PMC expansion slots; front panel reserves 4 RJ45 ports for direct wiring, all 8 serial channels can be guided to rear J4 connector via PIM422 transition module; onboard DIP switches for protocol mode configuration, compact layout suitable for narrow cabinet dense installation.
Electrical Technical Parameters
Rated power consumption: total 3W, 0.3A current at 3.3VDC, 0.4A current at 5VDC
Bus specification: compliant with PCI 2.2 standard, 32-bit bus width, maximum operating clock frequency 33MHz
UART configuration: 8 independent 16C550 compatible UARTs, each channel equipped with independent 64-byte transmit FIFO and 64-byte receive FIFO
Baud rate range: individually programmable from 100bps up to 921.6kbps, customized crystal supports maximum 6.2Mbps ultra-high baud rate
Signal protocol: configurable RS232, full-duplex RS422, half-duplex/full-duplex RS485 with optional terminal resistance via onboard DIP switches
Auxiliary hardware resources: 8-bit configurable switch input, 16-bit general-purpose timer/counter module for auxiliary timing control
Environmental Adaptation Parameters
Continuous operating temperature range: 0℃ ~ +60℃
Storage and transportation temperature range: -40℃ ~ +85℃
Humidity resistance: stable continuous operation under relative humidity 5%~95% without condensation
Electromagnetic compatibility: meets industrial IEC EMC anti-interference standards, anti-salt spray, anti-power frequency surge and high-frequency radiation interference for marine environments
Reliability index: MTBF reaches 600,000 hours under 25℃ normal temperature, compliant with MIL-HDBK-217-F industrial reliability standard
Vibration resistance: meets military standard mechanical vibration test requirements, stable operation under ship hull vibration and industrial mechanical jolt conditions

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!

Related models:

AL132
2301
MVME2308
IS200IGPAG2A
IS200WETCH1APR2
MVIP302
IS215VAMBH1A
T8110B
IS200WEMAH1AEA
8405N
MVME8105
5STP45Q2800
IS220PTURH1A
F3331
CI532V02