Description
Yokogawa NFAI143-H50 Full Introduction & Technical Specification
Basic Product Information
Brand: Yokogawa (Yokogawa Electric Corporation)
Model: NFAI143-H50
Official full product name: 16-Channel Galvanically Isolated Analog Input Module with HART Communication for CENTUM VP FIO Distributed Control System
Place of origin: Japan
Physical Dimension & Weight Parameters
Overall outline dimension: width 32 mm, height 106 mm, depth 130 mm;
net weight of the single module is approximately 0.24 kg;
the outer shell adopts flame-retardant engineering plastic integrated structure, built-in reinforced circuit board fixed with shock-absorbing structural glue;
standard FIO backplane card slot plug-in installation mode, compatible with DIN rail auxiliary installation;
external wiring supports pressure clamp terminals and MIL aviation cable dual connection modes;
overall module protection grade reaches IP20, designed for indoor control cabinet installation only;
standard single-slot card structure, multiple modules can be densely arranged on the same backplane to save cabinet space.
-
NFAI143-50
Electrical Voltage & Current Parameters
Module operating power is supplied by system backplane dual power supply; rated 5 VDC working current is 230 mA, rated 24 VDC working current is 540 mA;
built-in independent transmitter auxiliary power supply range is 24.0 VDC ~ 25.5 VDC, single channel maximum output current is limited to 25 mA, matching 2-wire and 4-wire field transmitters;
standard signal input range is 4–20 mA DC, maximum allowable overload input current is 24 mA;
on-state input resistance is fixed at 250 Ω, off-state input resistance maintains above 500 kΩ;
isolated withstand voltage between input channels and system internal circuit is 1500 V AC for 1 minute;
built-in independent overcurrent protection circuit for each channel to avoid component burnout caused by short-circuit access;
HART communication baud rate is fixed at 1200 bps, compatible with HART 5, HART 6 and HART 7 mainstream protocols;
internal circuit insulation grade is Class B.
Environmental Adaptation Parameters
Normal continuous operating temperature range: -10 ℃ ~ +60 ℃;
short-term allowable peak operating temperature range: -20 ℃ ~ +65 ℃;
storage and transportation temperature range: -40 ℃ ~ +85 ℃;
applicable ambient humidity range: 5% ~ 95% non-condensing relative humidity;
temperature drift is controlled within ±0.01% per degree Celsius, effectively reducing measurement deviation caused by ambient temperature change;
electromagnetic compatibility complies with IEC 61000 series industrial EMC standards, with strong suppression ability for electrostatic discharge, power surge and high-frequency harmonic interference;
vibration resistance meets IEC 60068-2-6 standard, adapting to slight long-term mechanical vibration of industrial cabinet operation environment.
-
NFAI143-50
♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦
Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.
Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.
Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!
Related models:






