Description
NXP QorIQ P5020 2.0GHz
4GB DDR3-1333MHz ECC memory
soldered down
512KB MRAM
Two PMC/XMC sites
Embedded NAND Flash
(8GB eMMC)
Up to two USB 2.0 ports
Up to three Ethernet ports (two
ports on front panel)
Up to five Serial ports
Two GPIO
BSP support including Wind
River VxWorks, Linux and Green
Hills Integrity
Hardware Specifications
Processor
NXP QorIQ P5020
2.0GHz: ENP1 variants (28W)
Memory
Designed for 4GB of 64-bit DDR3-1333 ECC SDRAM soldered

down
16MB SPI ROM for boot code (in 1+1 redundant 8MB banks/
devices)
512KB MRAM for data storage
8GB NAND Flash with eMMC interface
Backplane I/O
P1
– VME64x & 2eSST
P2
– VME64x & 2eSST
– PMC1 I/O (64 signals)
– Two USB 2.0
– Four RS-232/422/485
– One 10/100/1000BaseT Ethernet
– Two GPIO
Other Features
Real-time clock with battery backup
Real-time counters
Watchdog
Expansion Module
Site 1 supports PMC or XMC (PCI-X/PCIe x8)
Site 2 supports PMC or XMC (PCI-X/PCIe x4) or alternatively
supports a mounting kit for a 2.5” SATA HDD or SSD
Front Panel Connectivity
Two Gigabit Ethernet (RJ-45)
One RS-232/422/485 console (Micro-DB9)
Two PMC/XMC
Rear Transition Module
MVME8110-RTM (or VXS1-RTM1)
– Two USB 2.0 ports (Type A)
– Two RS-232/422/485 ports (Micro-DB9)
– One port is switchable between a console and standard
COM port
– Two RS-232/422/485 ports (internal headers)
– Two 10/100/1000BASE-T Ethernet ports (RJ-45)
– One PMC Interface Module (PIM) site
– Two GPIO (internal headers)
– Reset switch
Power Requirements
ENP1: 38 W idle, 42 W typical, 54 W max
Software and Firmware
Specifications
Boot
UBoot binary and source code
Board Support Packages
VxWorks (available from Wind River)
Linux
MVME8105-01E PDF
MVME8105-01E
♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦
Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.
Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.
Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!
More models available:





