Description

Default VME Settings (MVME6100-0161)

Name: MVME6100-0161 MOTOROLA Single-Board Computer Installation IN STOCK
Price: 5543 CNY
Availability: InStock

As shipped from the factory, the MVME6100-0161 has the following VME configuration programmed via Global Environment Variables (GEVs) for the Tsi148 VME controller. The firmware allows modification of specific VME settings to enable user customization of the environment.

The following describes the user-modifiable default VME settings. For detailed information, refer to the MOTLoad User’s Manual and Tundra’s Tsi148 User Manual, listed in Appendix C, Related Documentation.

1. VME PCI Master Enable

Command

plaintext

MVME6100> vmeCfg –s –m

Default Setting Display

plaintext

Displaying the selected Default VME Setting
- interpreted as follows:
VME PCI Master Enable [Y/N] = Y
MVME6100>

Interpretation

The PCI Master is enabled.

2. VMEbus Master Control Register

Command

plaintext

MVME6100-0161MVME6100> vmeCfg –s –r234

Default Setting Display

plaintext

Displaying the selected Default VME Setting
- interpreted as follows:
VMEbus Master Control Register = 00000003
MVME6100-0161>

Interpretation

The VMEbus Master Control Register is set to the default (RESET) condition.

3. VMEbus Control Register

Command

plaintext

MVME6100-0161> vmeCfg –s –r238

Default Setting Display

plaintext

Displaying the selected Default VME Setting
- interpreted as follows:
VMEbus Control Register = 00000008
MVME6100>

Interpretation

The VMEbus Control Register is set to a Global Timeout of 2048 µseconds.

4. CRG (Configuration Register Group) Registers

Command

plaintext

MVME6100-0161MVME6100> vmeCfg –s –r414

Default Setting Display

plaintext

Displaying the selected Default VME Setting
- interpreted as follows:
CRG Attribute Register = 00000000
CRG Base Address Upper Register = 00000000
CRG Base Address Lower Register = 00000000
MVME6100>

Interpretation

The CRG Attribute Register is set to the default (RESET) condition.

5. Inbound Image 0 (ITAT0)

Command

plaintext

MVME6100-0161> vmeCfg –s –i0

Default Setting Display

plaintext

Displaying the selected Default VME Setting
- interpreted as follows:
Inbound Image 0 Attribute Register = 000227AF
Inbound Image 0 Starting Address Upper Register = 00000000
Inbound Image 0 Starting Address Lower Register = 00000000
Inbound Image 0 Ending Address Upper Register = 00000000
Inbound Image 0 Ending Address Lower Register = 1FFF0000
Inbound Image 0 Translation Offset Upper Register = 00000000
Inbound Image 0 Translation Offset Lower Register = 00000000
MVME6100>

Interpretation

Inbound window 0 (ITAT0) is not enabled.
Key configurations:
- Virtual FIFO size: 256 bytes
- 2eSST timing: SST320
- Responds to: 2eSST, 2eVME, MBLT, and BLT cycles
- Address space: A32
- Responds to: Supervisor, User, Program, and Data cycles
Address mapping:
- VMEbus address range: 0x00000000 to 0x1FFF0000
- Translation to PCI-X bus: 1:1 (thus 1:1 mapping to local memory)

MVME6100-0161 PDF
MVME6100-0161

♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!