Name: MVME2700-761 MOTOROLA I/O Board in stock
Price: 5454 CNY
Availability: InStock

Description

To produce the desired configuration and ensure proper operation of the MVME2700, you may need to carry out certain hardware modifications before installing the module. The MVME2700 provides software control over most options: by setting bits in control registers after installing the module in a system, you can modify its configuration.Some options, however, are not software-programmable. Such options are controlled through manual installation or removal of header jumpers or interface modules on the base board or the associated transition module.
The MVME2700 is factory tested and shipped with the configurations described in the following sections. The MVME2700’s required and factory-installed debug monitor, PPCBug, operates with those factory settings.
The MVME2700 base board has provision for 1MB of 16-bit Flash memory. The RAM200 memory mezzanine accommodates 4MB or 8MB of additional 64-bit Flash memory. The Flash memory is organized in either one or two banks, each bank either 16 or 64 bits wide.
In synchronous serial communications, you can configure serial port 4 on the MVME2700 to use the clock signals provided by the TxC signal line. Header J17 configures port 4 to either drive or receive TxC (default). The factory configuration has port 4 set to receive TxC. A complete configuration of serial port 4 requires that you set additional jumper headers on the MVME2700 or the transition module.
A transmit clock receiver buffer (controlled by header J19) is associated with serial port 4. Installing a jumper on J19 enables the buffer. Removing the jumper disables the buffer. The factory configuration has the serial port 4 buffer enabled.
As described in other sections, a complete configuration of serial port 4 requires that you set additional jumper headers on the MVME2700 or the transition module.

MVME2700-761 PDF
MVME2700-761 MOTOROLA
MOTOROLA

MVME2700-761 MOTOROLA

…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!