Name: MVME2700-4461 Motorola new in stock
Price: 4343 CNY
Availability: InStock

Description

The MVME2700 base board has provision for 1MB of 16-bit Flash memory. The RAM200 memory mezzanine accommodates 4MB or 8MB of additional 64-bit Flash memory. The Flash memory is organized in either one or two banks, each bank either 16 or 64 bits wide. To enable Flash bank A (4MB or 8MB of firmware resident on solderedin devices on the RAM200 mezzanine), place a jumper across header J9 pins 1 and 2. To enable Flash bank B (1MB of firmware located in sockets on the base board), place a jumper across header J9 pins 2 and 3.
In synchronous serial communications, you can configure serial port 4 on the MVME2700 to use the clock signals provided by the RxC signal line. The configurations for the MVME712M-compatible and MVME761- compatible versions of the base board require different settings for port 4 to either drive or receive RxC (default).
In synchronous serial communications, you can configure serial port 4 on the MVME2700 to use the clock signals provided by the TxC signal line. Header J17 configures port 4 to either drive or receive TxC (default). The factory configuration has port 4 set to receive TxC. A complete configuration of serial port 4 requires that you set additional jumper headers on the MVME2700 or the transition module.
The MVME2700 is factory-configured as a VMEbus system controller by jumper header J20. If you select the “automatic” system controller function by placing a jumper on J20 pins 2 and 3, the MVME2700 determines whether it is the system controller by its position on the bus. If the board is in the first slot from the left, it configures itself as the system controller. If the MVME2700 is not to be system controller under any circumstances, place the jumper on J20 pins 1 and 2. When the board is functioning as system controller, the SCON LED is turned on.
The MVME2700 front panel LEDs and switches are mounted on a removable mezzanine board. Removing the LED mezzanine makes the mezzanine connector (J1, a keyed, double-row 14-pin connector) available for service as a remote status and control connector.

MVME2700-4461 pdf
MVME2700-4461

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!