Name: MVME2700-3351 Motorola Single Board Computer Installation
Price: 6554 CNY
Availability: InStock

Description

The RAM200 DRAM mezzanine mounts on top of the MVME2700 base board. To upgrade or install a RAM200 mezzanine, refer to Figure 3-1 and proceed as follows:

Attach an ESD strap to your wrist. Attach the other end of the ESD strap to the chassis as a ground. The ESD strap must be secured to your wrist and to ground throughout the procedure.
Perform an operating system shutdown. Turn the AC or DC power off and remove the AC cord or DC power lines from the system. Remove chassis or system cover(s) as necessary for access to the VMEmodules.
Carefully remove the MVME2700 from its VMEbus card slot and lay it flat, with connectors P1 and P2 facing you.
Place the RAM200 mezzanine module on top of the base board. Connector J9 on the underside of the RAM200 should connect smoothly with the corresponding connector J6 on the MVME2700.
Insert the four short Phillips screws through the holes at the corners of the RAM200, into the standoffs on the MVME2700. Tighten the screws. 6. Reinstall the MVME2700 assembly in its proper card slot. Be sure the module is well seated in the backplane connectors. Do not damage or bend connector pins. 7. Replace the chassis or system cover(s), reconnect the system to the AC or DC power source, and turn the equipment power on.

PCI mezzanine card (PMC) modules mount beside the RAM200 mezzanine on top of the MVME2700 base board. To install a PMC module, refer to Figure 3-2 and proceed as follows:

Attach an ESD strap to your wrist. Attach the other end of the ESD strap to the chassis as a ground. The ESD strap must be secured to your wrist and to ground throughout the procedure.
Perform an operating system shutdown. Turn the AC or DC power off and remove the AC cord or DC power lines from the system. Remove chassis or system cover(s) as necessary for access to the VMEmodules.
Carefully remove the MVME2700 from its VMEbus card slot and lay it flat, with connectors P1 and P2 facing you.
Remove the PCI filler from the front panel.

MVME2700-3351 PDF
MVME2700-3351

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!