Name: MVME2604-712-IO Motorola I/O Processor Module
Price: 4543 CNY
Availability: InStock

Description

Description
The MVME2604-712-IO is an I/O transition module for Motorola’s MPU VMEmodule, VME Processor Module, Embedded Controller, and Single Board Computer (SBC) families of processor modules, referred to in this manual as MVMExxxx.
The MVME2604-712-IO is used as an interface between the processor module and its peripheral devices. The purpose of this module is to provide rear panel industry-standard connectors that simplify external customer cable
requirements.The P2 adapter board and cables are supplied for interconnection between the MVME712M and the MVMExxxx. The P2 adapter assembly routes the I/O signals and grounds from the P2 connector on the chassis backplane, at the VMEmodule MPU connection, to the MVME2604-712-IO.The MVME2604-712-IO routes the signals to four serial ports, implemented with four industry standard DB-25 connectors on its front panel. The serial ports may be configured for EIA-232-D DTE or DCE through jumper arrangements on the MVME2604-712-IO.

MVME712M Transition Module
The features of the MVME2604-712-IO include:
❏ Four 25-pin multiprotocol EIA-232-D serial ports(through P2 adapter)
❏ One independent printer port (through P2 adapter)
❏ Small Computer Systems Interface (SCSI) shielded connector bus interface (through P2 adapter) for connection to internal and
external devices
❏ Green LED on module to indicate terminator power
❏ Yellow LED on module to indicate transceiver power
❏ SCSI terminating resistors mounted in sockets for end of cable or middle of cable configuration
❏ Modem connection on module
❏ Radio Frequency Interference (RFI) protection on front panel
❏ Electrostatic Discharge (ESD) protection on front panel

The MVME712M requires the use of the P2 adapter board. The features of
the P2 adapter board include:
❏ A connector that permits SCSI cable connection to other SCSI devices and/or to MVME2604-712-IO through a flat ribbon cable
❏ SCSI terminating resistors mounted in sockets, for end of cable or middle of cable configuration
❏ Terminator power developed on the P2 adapter from the +5 Vdc on connector P2, and fused (1 A) on the P2 adapter
❏ A connector that interfaces the EIA-232-D ports, printer port, SCSI,and Ethernet signals to the MVME2604-712-IO。

MVME2604-712-IO PDF

MVME2604 MVME2604

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!