Name: MVME167P-36SE MOTOROLA VME board
Price: 5431 CNY
Availability: InStock

Description

This section applies to all hardware installations you may perform that involve the MVME167P board.
Motorola strongly recommends the use of an antistatic wrist strap and a conductive foam pad when you install or upgrade the board. Electronic components can be extremely sensitive to ESD. After removing the board from the chassis or from its protective wrapper, place the board flat on a grounded, static-free surface, component side up. Do not slide the board over any surface.
If no ESD station is available, you can avoid damage resulting from ESD by wearing an antistatic wrist strap (available at electronics stores). Place the strap around your wrist and attach the grounding end (usually a piece of copper foil or an alligator clip) to an electrical ground. An electrical ground can be a piece of metal that literally runs into the ground (such as an unpainted metal pipe) or a metal part of a grounded electrical appliance. An appliance is grounded if it has a three-prong plug and is plugged into a three-prong grounded outlet. You cannot use the chassis in which you are installing the MVME167P itself as a ground, because the enclosure is unplugged while you work on it.
Each MVME167P may be configured with readable jumpers. These jumpers can be read as a register (at address $FFF4 0088) in the VMEchip2 Local Control/Status register (refer to the Programmer’s Reference Guide for details). The bit values are read as a 1 when the jumper is off, and as a 0 when the jumper is on. The MVME167P is shipped from the factory with all jumpers installed, as diagrammed below.
The MVME167P can operate as VMEbus system controller. The system controller function is enabled/disabled by jumpers on header J6. When the MVME167P is system controller, the SCON LED is turned on。

Note As shown in the preceding table, the MVME167P Petra/MCECC interface supports on-board ECC DRAM emulations up to 64MB. For sizes beyond 64MB, the MVME167P accommodates memory mezzanines of the types used on previous MVME167 boards. One additional mezzanine can be plugged in to provide up to 128MB of supplementary DRAM.

MVME167P-36SE

MVME167P-36SE PDF
MVME167P-36SE

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!