This manual presents general details, pre-operational preparation and installation guidelines, operational procedures, and functional explanations for the MVME133S, MVME133S-001, and MVME133SA-020 MPU VMEmodules.Throughout this manual, the module is generally referred to as the MVME133, unless specific references to individual models are necessary.
Model Designations
The MVME133 is offered in three distinct versions, which are outlined in Table 1-1.
Features
The MVME133 is equipped with the following key features:
Double-high/single-wide VME board form factor
Address 24/Data 32 (A24/D32) VMEbus master (compatible with A24/D16)
(Applicable to MVME133S and MVME133S-001 models)
Address 32/Data 32 (A32/D32) VMEbus master (compatible with A32/D16, A24/D32, and A24/D16)
(Applicable to the MVME133SA-020 model)
MC68020 Microprocessor with 32-bit address and data capabilities
1MB of shared local dynamic RAM (32 bits wide), accessible via the VMEbus
Four 28-pin JEDEC sockets for accommodating ROMs, PROMs, EPROMs, or EEPROMs (arranged in two banks, each 16 bits wide) — supporting a maximum total capacity of 256KB
Three 8-bit programmable timers, configurable for tick and watchdog operations
Time-of-day clock/calendar (real-time clock) powered by the MM58274A chip
Front-panel asynchronous DB25 serial debug port (compliant with RS-232C standards), integrated with the MC68901 MFP
Dual multiprotocol (synchronous/asynchronous) serial ports (utilizing the Z85C30 controller):
– RS-485/RS-422A compatibility (Port A)
– RS-232C compatibility (Port B)
VMEbus system controller functionality, including a level 3 arbiter
Single-level bus requester (with jumper-selectable levels)
VMEbus interrupter component
VMEbus interrupt handler supporting all seven interrupt levels
Front-panel status LEDs for indicating RUN, HALT, and FAIL states
Front-panel RESET and ABORT switches for manual control
Remote reset capability via the edge connector P2
Five-position software-readable header, which is part of the Module Status Register (MSR)
Specifications
Detailed specifications for the MVME133 are provided in Table 1-1.
Related Documentation
The following publications may offer additional useful information. If not included with the product, they can be purchased by contacting your local Motorola sales office.
Document Title
Motorola Publication Number
MVME133S Support Information (see the Support Information section in this chapter)
SIMVME133S/Dx
MVME133 Debugging Package User’s Manual
MVME133BUG/Dx
MVME133/D2A2 1-7 — GENERAL INFO
NOTE: While not listed above, every manual published by Motorola Computer Group includes a suffix indicating the document’s revision level (e.g., /D2 denotes the second revision of a manual). Supplements to a manual share the same base number as the original manual but include an additional suffix (e.g., /D2A1 represents the first supplement to the manual).
The following publications are available from the sources specified below:
VMEbus Specification DetailsTitle: Versatile Backplane Bus: VMEbus (ANSI/IEEE Std 1014-1987)Source: The Institute of Electrical and Electronics Engineers, Inc.Address: 345 East 47th Street, New York, New York 10017
Z85C30 Serial Communications Controller DetailsTitle: SCC User’s GuideSource: Zilog, Inc.Address: 210 East Hacienda Avenue, Campbell, CA 95008-6600
MM58274 Real-Time Clock DetailsTitle: Data Sheet and Application Note 365Source: National Semiconductor CorporationAddress: 2900 Semiconductor Drive, Santa Clara, CA 95051
Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.
Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.
Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!