Description
Rexroth MSK061C-0600-NN-M1-UP1-NANN Product Introduction
Brand: Rexroth (Bosch Rexroth)
Model: MSK061C-0600-NN-M1-UP1-NANN
Product Name: IndraDyn S Permanent-Magnet Synchronous Servo Motor
Weight: Approximately 8.8 kg
Origin: Germany
-
MSK061C-0600-NN-M1-UP1-N
HS Code: 85015290 (AC synchronous servo motor for industrial automation)
Operating Temperature: Continuous operating ambient range 0 °C to +40 °C; storage and transport temperature -20 °C to +70 °C, non-condensing environment
Input: Three-phase AC power input supplied by matching servo drive; 24 V DC auxiliary power input for built-in holding brake; encoder power supply input from drive feedback port. Nominal continuous stand-still current 8.7 A; peak current 34.7 A.
Output: Mechanical rotary torque output; continuous stand-still torque 9.0 Nm, peak torque 32.0 Nm at maximum speed 6000 rpm; absolute position and velocity digital feedback signal output via Hiperface encoder interface transmitted back to servo drive controller.
Dimensions: Flange size 130 mm × 130 mm, overall length 315 mm, shaft diameter 24 mm with keyway conforming to DIN 6885-1; standard flange-mount installation.
Main Functions: Converts three-phase electrical energy into precise rotary mechanical output under closed-loop control of Rexroth servo drives, realizing high-accuracy position, velocity and torque regulation for automated axes. The integrated multiturn absolute optical encoder captures rotor angular position, rotational speed and rotation-count information, sending digital feedback data to servo drive so the control loop can calculate real-time deviation and adjust output current without homing procedure upon power-on. It provides high overload capacity to handle short-term peak loads during acceleration and deceleration cycles. The optional built-in electrically-released holding brake locks motor shaft securely when power supply drops or equipment enters stand-still status, preventing axis free-fall or unintended movement for vertical-axis applications. Natural convection cooling enables continuous S1-mode operation without auxiliary fan equipment. Motor-mount parameter memory stores motor characteristic data, supporting automatic drive parameter identification during commissioning. Rotatable motor and encoder connectors up to 240-degree rotation simplify field cable routing. IP65 housing protects internal windings and encoder assembly against dust and low-pressure water jets. Winding thermal sensors monitor internal motor temperature continuously, feeding temperature warning signals to upper-level drive system for over-temperature protection, reducing risk of winding damage caused by long-time overload. It supports flexible configuration with planetary gear units and works seamlessly with IndraDrive series drives to complete multi-axis coordinated motion tasks.
-
MSK061C-0600-NN-M1-UP1-N
♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦
Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.
Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.
Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!
Related models:






