Name: IS200ERIOH1ACB GE I/O Board
Price: 4242 CNY
Availability: InStock

Description

IS200ERIOH1ACB GE I/O Board

The IS200BICLH_A Bridge Interface Board (BICL)provides an interface between the Innovation Series Drive main control board and the Bridge Personality Interface boards (IS200BPIA, IS200BPIB, or IS200SCNV). This board also provides a panel and system fault string interface, bridge and ambient temperature monitoring, and a fan pulse width modulated (PWM) speed control interface. Bridge control, fault string, temperature monitoring, and fan control connections are made through the (P1)= connector. The main control board and logic power supply connections are made through the (P2) connector. The BICL board is designed to be mounted in a VME type rack. See Table 1 for board specifications and Figure 1 for a block diagram of the board.
Control logic on this board is implemented in an electronically programmable logic device (EPLD) that is configured from the central processing unit (CPU) of the main control board on power-up or a hard reset. At the present time there are two EPLD configurations. The BICLEPLD configuration is required to interface with a BPIA or BPIB card and the SCNVEPLD configuration for the SCNV card. The following is a list of major functions for each configuration.

IS200ERIOH1ACB GE I/O Board

MA and MB Contactor Pilot And Sense Input
The MA contactor pilot relay has two functions,providing a set of Form C contacts to control the main contactor and control of the bridge IGBT gate driver power. To pick up this relay, the BICDABL and NMAC lines must be low and the fault string must be satisfied. An MA sense input is provided and should be used with an interlock on the main contactor to inhibit bridge firing if the main contactor does not pick up when commanded to. This pilot is dropped out on a WD fault. To pick up the MB contactor pilot relay, the BICD board’s ABL and NMBC lines must be low and the fault string must be satisfied. No dedicated sense input is provided for the MB contactor. This pilot is also dropped out on a WD fault.
The BICL board plugs into in a VME type rack via the P1 and P2 connectors. There are no other connections to the BICL board. Refer to Table 2 for P1 pin signal descriptions and to Table 3 for P2 pin signal descriptions.The BICL board does not include any adjustable hardware, testpoints, LED indicators, or fuses. See Figure 2 for a board faceplate illustration and Figure 3 for a board layout diagram.

IS200ERIOH1ACB GE I/O Board pdf

IS200 Flyer V2 (1)

IS200ERIOH1ACB GE I/O Board

Board Identification
A printed wiring board is identified by an alphanumeric part (catalog) number located near its edge.Figure 4 explains the structure of the part number.The board’s functional acronym, shown in Figure 3, normally is based on the board description, or name. For example, the BICL board is described as the IGBT Drive/Source Bridge Interface board.
Warranty Terms
The GE Terms and Conditions brochure details product warranty information, including warranty period and parts and service coverage. The= brochure is included with customer documentation. It may be obtained separately from the nearest GE Sales Office or authorized GE Sales Representative.

IS200ERIOH1ACB GE I/O Board

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!