Name: HMS01.1N-W0150-A-07-NNNN HZK02.1-W003N Bosch Rexroth IndraDrive
Price: 5332 CNY
Availability: InStock

Description

Operation Steps for HMS01.1N-W0150-A-07-NNNN

Pre-Operation Checks

Ensure the working environment meets the specified conditions (e.g., temperature range: 0–40°C, humidity: 10–90% non-condensing).

Inspect the device for any visible damage, loose connections, or missing components. Verify that all cables and connectors are in good condition.

Installation

Mount the HMS01.1N-W0150-A-07-NNNN on a stable, flat surface using the provided mounting brackets and screws, ensuring secure fixation to prevent vibration-related issues.

Connect the power supply cable to the designated power input terminal, ensuring the voltage matches the device’s requirements (refer to the manual for specific voltage details).

Attach the signal cables to the corresponding input/output ports, following the wiring diagram to ensure correct polarity and connection.

Initial Setup

Power on the device. The status indicator light should illuminate, indicating successful power supply. Allow the device to initialize for 2–3 minutes.

Use the dedicated configuration software (if applicable) to connect to the device via the specified communication port (e.g., USB, Ethernet).

Configure basic parameters such as operating mode, communication protocol settings, and threshold values according to the system requirements. Save the settings.

Functional Testing

Perform a test run by sending a test signal or initiating a sample operation. Monitor the device’s response through the software interface or status indicators.

Check if the output signals are within the expected range and if all functions (e.g., data acquisition, control actions) operate correctly.

If any anomalies are detected, troubleshoot by rechecking connections, parameter settings, or consulting the error code manual.

Normal Operation

Once the functional test is passed, start the device in normal operating mode. Continuously monitor the status indicators and relevant parameters during operation.

Record operational data at regular intervals (e.g., every hour) for performance tracking and maintenance purposes.

Shutdown Procedure

To shut down the device, first stop the connected system or process to avoid sudden interruptions.

Power off the device via the main power switch. Disconnect the power supply cable and any signal cables if long-term shutdown is required.

HMS01.1N-W0150-A-07-NNNN pdf

HMS01.1N-W0150-A-07-NNNN

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!