Description
- Confirm that the H201TI device is compatible with the target system (e.g., industrial control panels, monitoring setups) by checking the product specification sheet and system requirements.
- Inspect the device for physical damage, such as cracks on the casing, bent pins in connectors, or loose components. Ensure all accessories (e.g., cables, mounting brackets) are included and intact.
- Prepare necessary tools: screwdrivers (flathead and Phillips), anti-static wristband, wire strippers, and a multimeter. Verify the operating environment meets the device’s specifications (temperature: -10°C to +60°C; humidity: 5% to 95% non-condensing) and is free from excessive vibration or electromagnetic interference.
-
- Choose a suitable location for installation, ensuring easy access for wiring and future maintenance. Use the provided mounting brackets and screws to secure the H201TI to a panel or DIN rail. Tighten the screws to a torque of 0.8–1.2 N·m to ensure stability.
- If mounting on a DIN rail, align the device’s rail clips with the rail and push firmly until it locks into place.
- Power off the target system before connecting wires to avoid electrical damage. Wear an anti-static wristband connected to a grounded surface.
- Refer to the wiring diagram in the H201TI manual to identify terminals for power input, signal inputs, and outputs.
- Power Input: Connect the 24V DC power supply to the “PWR IN” terminals, ensuring correct polarity (+ to +, – to -). Use a multimeter to verify the input voltage is within the 20–28V DC range.
- Signal Inputs: Connect sensors or external devices to the “SIGNAL IN” terminals. For analog inputs (e.g., 4–20mA, 0–10V), strip wire ends to 6–8mm, insert into terminals, and tighten screws to 0.3–0.5 N·m.
- Outputs: Connect actuators or monitoring devices to the “OUTPUT” terminals, following the same wiring procedure as signal inputs.
- After wiring, power on the target system and the H201TI. The device’s power LED should illuminate green, indicating successful power-up. A red LED or no light indicates a wiring issue—check power connections and voltage.
- Allow the device to initialize for 1–2 minutes. During initialization, the status LED may blink; it will remain steady green once ready.
- Access the configuration menu via the device’s front-panel buttons or compatible software (if supported). Use the “Menu” button to navigate to “Settings,” then adjust parameters such as signal range, output type, and alarm thresholds based on application needs.
- Save configurations by pressing “Enter” or selecting “Save” in the software. The device will restart to apply changes.
-
- ♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦
Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!More models available：
E-mail:geabbdcs@gmail.com
WhatsApp:+86 13313705507
Wechat:+86 13313705507
Phone:+86 13313705507
Twitter:@Bella_abbdcs
Telegram:+86 13313705507
Skype:live:.cid.4563d9d89ae553bce