Description
- Verify that the GE HYDRAN M2 is compatible with the target equipment (e.g., transformers, bushings) by checking the product specifications and the equipment’s technical requirements.
- Inspect the device for any physical damage, such as cracks on the housing, loose connectors, or damaged cables. Ensure all accessories (e.g., sensors, mounting brackets) are included and in good condition.
- Prepare necessary tools: screwdrivers, cable strippers, torque wrench, and a multimeter. Confirm that the working environment meets the device’s operating conditions (temperature: -30°C to +70°C; humidity: 5% to 95% non-condensing).
- Choose a suitable mounting location on the target equipment, ensuring easy access for wiring and maintenance, and away from direct sunlight, excessive vibration, or sources of electromagnetic interference.
- Use the provided mounting brackets and screws to secure the HYDRAN M2. Tighten the screws to the specified torque (typically 1.5–2.5 N·m) to ensure a stable installation.
- Connect the dissolved gas analysis (DGA) sensor to the “SENSOR IN” port on the HYDRAN M2 using the dedicated cable. Ensure the connector is firmly plugged in and secured with the locking mechanism.
- Connect the power supply cable to the “POWER” terminals, observing the correct polarity (AC or DC as per the device specifications). For AC power, typically 100–240V; for DC power, 24V is common.
- Connect the communication cable (e.g., Ethernet, Modbus) to the corresponding communication port if remote monitoring is required. Follow the wiring diagram in the user manual for proper pin assignments.
- Switch on the power supply. The device’s power LED should illuminate green, indicating successful power-up. If the LED is red or does not light up, check the power connection and voltage level.
- Allow the device to initialize, which may take 2–3 minutes. During initialization, the status LED will blink; it will remain steady green once initialization is complete.
- Press the “MENU” button on the front panel to access the configuration menu. Use the arrow keys to navigate through options such as “Device Settings,” “Measurement Parameters,” and “Communication Setup.”
- Set the device name, measurement interval (e.g., 1 hour, 24 hours), and alarm thresholds for gas concentrations (e.g., hydrogen, methane) based on the application requirements.
- Save the settings by pressing the “OK” button. The device will restart to apply the new configurations.
GE HYDRAN M2 PDF
♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦
Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.
Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.
Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!
More models available：
E-mail:geabbdcs@gmail.com
WhatsApp:+86 13313705507
Wechat:+86 13313705507
Phone:+86 13313705507
Twitter:@Bella_abbdcs
Telegram:+86 13313705507
Skype:live:.cid.4563d9d89ae553bce