G60-G01HCHF8FH6PM8H GE Protection & Control Relay

G60-G01HCHF8FH6PM8H belongs to GE Multilin UR universal relay product line, which is a high-performance microprocessor-based generator integrated protection and control relay developed by GE Grid Solutions, specially designed for large steam turbine generators, gas turbine combined-cycle generators, hydropower units and offshore generator sets. This equipment integrates complete fault protection, real-time operation monitoring, automatic synchronization control, disturbance recording and intelligent communication functions, and it relies on high-precision CT/VT signal acquisition unit to monitor generator stator, rotor, winding and grid connection status all the time.

Category: Tag:
Whatsapp:+86 13313705507
WeChat:+86 13313705507
E-mail:geabbdcs@gmail.com
E-mail:info@geabb.com
Contacts:KEN HE

Description

GE G60-G01HCHF8FH6PM8H Full Introduction & Technical Specification
Basic Product Information
Brand: GE Vernova (General Electric Multilin)
Model: G60-G01HCHF8FH6PM8H
Official full product name: Multilin G60 Generator Comprehensive Protection & Control Relay (Horizontal Rack Mount, Enhanced CT/VT Module, HART & IEC 61850 Enabled Generator Management Unit)
Place of origin: United States (core chip & hardware design), final assembly finished in Hungary
Customs HS Code: 85372090 (power system relay protection automatic control device for power generation equipment)
Physical Dimension & Weight Parameters
Overall outline dimension for standard 19-inch horizontal rack installation: width 482.6 mm, height 177.8 mm, depth 245 mm;
net weight of the complete single relay assembly is approximately 7.3 kg;

G60-G01HCHF8FH6PM8H

G60-G01HCHF8FH6PM8H

the outer shell adopts cold-rolled steel shell with electrostatic anti-corrosion coating, internal circuit board is fixed with shock-absorbing structural glue to resist long-term cabinet vibration;
front panel is equipped with color liquid crystal display screen, physical operation buttons and status indicator lights; rear panel is reserved with aviation plug terminals, Ethernet optical fiber interface and power wiring terminals;
main body protection grade reaches IP52, front panel protection grade reaches IP54, effectively blocking dust and condensed water intrusion;
standard 4U cabinet height design, which is convenient for dense arrangement in power distribution cabinet; internal electronic components adopt Class F high temperature resistant insulation grade.
Electrical Voltage & Current Parameters
Rated auxiliary working power supply range: wide-range AC/DC universal power supply, AC 88 V ~ 265 V (50/60 Hz), DC 88 V ~ 265 V;
typical static standby operating current: 0.28 A; rated full-load operating current: 0.7 A; instantaneous peak current limited within 1.1 A;
CT current signal input specification: standard 1 A / 5 A dual configurable input, continuous bearing 4 times rated current, 3-second overload bearing 50 times rated current, 1-second instantaneous impact bearing 100 times rated current;
VT voltage signal input range: AC 0 ~ 150 V, input impedance greater than 100 kΩ;
digital input rated working voltage: 24 VDC / 125 VDC optional, single input quiescent current 8 mA;
contact output parameter: Form-A normally open relay contact, single contact rated load AC 250 V / 16 A, DC 30 V / 10 A, mechanical service life up to 30 million actions;
built-in independent anti-surge, reverse connection, overvoltage and overcurrent protection circuit;
Ethernet communication standard: 10/100 Mbps adaptive RJ45 electrical port and multi-mode optical fiber port, RS485 serial port baud rate adjustable from 300 bps to 19200 bps;
internal overall static power consumption: ≤65 VA.
Environmental Adaptation Parameters
Normal continuous long-term operating temperature range: -20 ℃ ~ +55 ℃;
allowable short-time peak operating temperature range: -25 ℃ ~ +60 ℃;
storage and transportation temperature range: -40 ℃ ~ +85 ℃;
applicable ambient relative humidity range: 5% ~ 95% non-condensing humidity;
vibration resistance meets IEC 60068-2-6 standard, stably resisting periodic vibration of 10 Hz ~ 150 Hz; impact resistance can withstand 15 g instantaneous mechanical impact;
electromagnetic compatibility fully complies with IEC 61000-6-2 industrial EMC standard, with strong suppression capability against electrostatic discharge, power surge, radio frequency interference and harmonic interference in power plant environment;
the equipment can operate normally without power derating under altitude below 2000 meters.

G60-G01HCHF8FH6PM8H

G60-G01HCHF8FH6PM8H

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!

Related models:

AL132
2301
MVME2308
IS200IGPAG2A
IS200WETCH1APR2
MVIP302
IS215VAMBH1A
T8110B
IS200WEMAH1AEA
8405N
MVME8105
5STP45Q2800
IS220PTURH1A
F3331
CI532V02