Name: F650BFBF1G0HI GE PLC CONTROLLER Module
Price: 5222 CNY
Availability: InStock

Description

F650BFBF1G0HI GE PLC CONTROLLER Module

The F650BFBF1G0HI module is certified for hazardous location usage. This module is an F650BFBF1G0HI controller coupled with a seven I/O port expansion board. The UCSCH1 controller contained within the UCECH1 module has the same features and benefits as the stand-alone UCSCH1 controller. For further details on the UCECH1 module, refer to the Mark VIe and Mark VIeS Control Systems Volume II: General-purpose Applications System Guide (GEH-6721_Vol_II), the section
UCECH1x I/O Port Expansion Module.

F650BFBF1G0HI GE PLC CONTROLLER Module

TMR Control Power using JPDS
A power distribution system using the JPDS power distribution board supports up to three independent control power supply buses:
R, S, and T. Following are specific instructions for these connections:
• Up to three 24 or 28 V dc, 20 A control power supplies (R, S, T) may be connected to the JPDS board using wire harness type A. The power supplies are connected to the mains supply.
• An optional PPDA module is used with the JPDS to monitor the health of the power distribution system. It is connected directly to I/O connector JA1, and to power supply connector P4 using wire harness type E.
• The JPDS board supplies R, S, and T power from connectors JAR, JAS, and JAT to controllers using wire harness type B or Ethernet switches using wire harness type C. Connectors JCR, JCS, and JCT are not used because these outputs are not current limited.
• The JPDS board may feed up to six JPDH boards using wire harness type D.
• The JPDH board fans out control power for up to eight R, S, and T (each) modules using wire harness type E. The R, S,and T control power buses can be extended to another JPDH from connector J1X using wire harness type D. Connectors
JRS, JSS, and JTS are not used because these outputs are not current limited.
• The JPDE board can be used to provide redundantly sourced I/O wetting power via outputs JS1-3 and JFA-C. The I/O wetting power can be further fused and distributed to I/O terminal boards using the JPDD I/O wetting branch power distribution. Refer to the example diagram and cable table.

F650BFBF1G0HI GE PLC CONTROLLER Module

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!