Name: DSMB-01C ABB Power Supply Board
Price: 6543 CNY
Availability: InStock

Description

DSMB-01C ABB Current Limiting Module Installation Guidelines‌

‌1. Pre-Installation Requirements‌

‌Environmental Conditions‌:
- Operating temperature: 0°C to +55°C (derate above +40°C)4
- Humidity: ≤85% non-condensing
- Mounting orientation: Vertical (±5° tilt allowed)
‌Power Supply Verification‌:
- Input voltage: 220V AC (±10%), 380V rated4
- Ensure circuit breakers rated for 100–400A current range4

‌2. Mechanical Installation‌

‌Mounting Procedure‌:
1. Align module with DIN rail or bolt holes (M4 size).
2. Secure using torque-controlled tools (recommended: 0.6 N·m).
‌Clearance‌: Maintain ≥50mm spacing from heat sources.

‌3. Electrical Wiring‌

‌Terminal Connections‌:
- Use shielded cables for I/O signals (max. bend radius: 5× cable diameter).
- Ground resistance: <4Ω (verified with insulation tester).
‌Short-Circuit Protection‌:
- Output current limited to 1.2A; auto-shutdown triggers on ground faults1.

‌4. Protection Mode Configuration‌

‌Mode Selection (via DIP switches)‌:
- ‌Auto-Reset (Default)‌: Output restarts after 10s delay post-fault clearance1.
- ‌Fault Latch‌: Requires manual reset via software/hardware trigger1.
‌Diagnostics‌: Monitor LED indicators:
- Green: Normal operation
- Red: Active fault (check diagnostic手册 code).

‌5. Post-Installation Checks‌

Perform continuity test on all terminals.
Validate current limiting function with 500mA test load

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!