Name: DS200DCFBG1BGB GENERAL ELECTRIC DC POWER FB BOARD
Price: 5333 CNY
Availability: InStock

Description

Installation Guidelines for GE DS200DCFBG1BGB Drive Control Board

‌1. Pre-Installation Preparation‌

‌Power Verification‌
- Confirm input power: 120V AC (±5%), max. load current 3A (per channel).
- Disconnect all power sources and discharge capacitors (>5 mins).
‌Static Protection‌
- Wear ESD wrist strap (1MΩ resistance to ground).
- Handle only by insulated edges (ESD-sensitive component).

‌2. Mechanical Installation‌

‌Step 1‌: Align board with guide rails in 6U chassis slot (Mark V system compatible).
‌Step 2‌: Secure using M4 screws (torque: 0.8 N·m ±10%).
‌Step 3‌: Verify full insertion of 96-pin backplane connector (audible lock click).

‌3. Electrical Connections‌

‌Terminal Blocks (TB3/TB4)‌
- Wire gauge: 16–22 AWG stranded copper.
- Torque terminal screws to 0.6 N·m (in.-lb scale acceptable).
‌Feedback Cabling‌
- Route encoder cables separately from power lines (min. 50mm spacing).
- Ground shield at drive end only (PELV circuit requirement).

‌4. Post-Installation Checks‌

‌Visual Inspection‌
- No component damage/pin deformation (refer to DS200-XXXX-GE manual).
- Ensure jumper JP1 is in default position (factory setting).
‌Power-On Test‌
- LED status:
  - Solid green: Normal operation
  - Flashing red: Fault detected (check diagnostic code).

DS200DCFBG1BGB PDF

ds200dcfbg1b

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!