CR306G004LVH module NEW in stock

Category: Tag:
Whatsapp:+86 13313705507
WeChat:+86 13313705507
E-mail:geabbdcs@gmail.com
E-mail:info@geabb.com
Contacts:KEN HE

Description

Maintenance
1. Always remove power from device before performing any
maintenance.
2. Keep magnet mating surface free of accumulated dirt or dust.
3. Do Not Oil Or Grease the magnet mating surfaces.
4. Contacts are carefully designed for maximum life. They need only be
replaced when nearly all the silver tip is gone and the contact tip support is exposed. Do Not File the contacts. Filing or dressing the contacts only results in lost tip material and reduces life.
5. The ultimate tripping current of the installed relay heater can be adjusted ± 10% by using the adjustment dial, shown in Figure 1.
6. On reversing and two-speed starters, the mechanical interlock has
been factory adjusted and normally should never have to be readjusted. If readjustment is ever needed, these steps should be
followed:


A. Close one contactor by hand by pushing down on armature.
B. Using the other hand, loosen the nut on opposite contactor in terlock arm and slide it towards the top of the elongated slot until all
gap is taken up between the two arms. Follow the same procedure
with the opposite contactor and interlock arm.
C. Best adjustment is usually obtained when both mechanical interlock
arm assemblies are as far up in the elongated slot as possible.
D. With both arms adjusted, there should be a very slight gap (approximately 1
/15-inch) between the arms with both contactors open.
Neither arm should overlap the other with both contactors open.
Caution: Before adjusting or operating reverser, make sure the
mechanical interlock arm 1s engaged with movable contact arm.

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

 

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

 

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!

 

 

More models available:

DS200CTBAG1ADD

9905-263

5233-2089

IC8008SI228RD2

8237-1006

5233-2089

8446-1019

EASYGEN-3500-5/P2 8440-2145

9905-017

8200-314