Description
Wärtsilä CCM10 Full Introduction & Technical Specification
Basic Product Information
Brand: Wärtsilä (Wärtsilä Corporation)
Model: CCM10, official part number PAAE176143
Official full product name: Cylinder Control Module 10, dedicated distributed cylinder control unit for UNIC C3 & WECS 9500 marine engine control system
Place of origin: Vaasa, Finland
Customs HS Code: 85371090 (marine engine electronic control module, industrial automation control assembly)
Physical Dimension & Weight Parameters
Overall external outline dimension: 310mm in length, 190mm in width, 40mm in thickness;
the net weight of the complete standard assembly is 2.59kg, and the reinforced thickened shell version weighs 2.7kg;
the outer shell adopts flame-retardant glass fiber reinforced engineering plastic with built-in aviation aluminum alloy reinforcement skeleton, internal circuit board is fixed with high-temperature resistant shock-absorbing structural glue to resist long-term engine vibration;
standard card slot cabinet embedded installation and wall-mounted screw fixing dual installation modes are supported, matching dedicated engine control cabinet backplane reserved positions;
the overall protection grade reaches IP20 for internal circuit, and the sealed wiring terminal area reaches IP54 to block oil mist, dust and condensed water erosion;
the internal electronic component insulation grade is Class F, with continuous high-temperature resistance up to 155℃.
-
CCM10
Electrical Voltage & Current Parameters
Standard rated operating power supply is redundant 24 VDC, the allowable working voltage fluctuation range is 18 VDC ~ 30 VDC;
typical static standby operating current is 175mA, continuous rated full-load operating current is 320mA, instantaneous peak surge current is limited within 480mA;
single-channel driving output for fuel injection valve is PWM high-power driving signal, single-channel maximum instantaneous output current is 2.2A;
built-in independent 5VDC sensor auxiliary power supply, rated output current 100mA, specially used for speed phase sensor power supply;
internal circuit integrates reverse connection protection, overvoltage protection, overcurrent short-circuit automatic cut-off protection;
main communication bus adopts dual redundant CAN bus, standard communication baud rate 250kbps, reserved RS485 auxiliary communication interface compatible with Modbus-RTU protocol;
hard-wired speed and phase signal input impedance is 120Ω, meeting engine crankshaft position sensor signal access standard;
the whole module rated power consumption is less than 7.7W.
Environmental Adaptation Parameters
Normal continuous long-term operating temperature range: -25℃ ~ +70℃;
short-term allowable peak operating temperature range: -35℃ ~ +75℃;
storage and transportation temperature range: -45℃ ~ +85℃;
applicable ambient relative humidity range: 5% ~ 98% non-condensing humidity;
vibration resistance complies with DNV GL marine mechanical vibration standard, stably enduring periodic vibration of 10Hz~2000Hz and instantaneous mechanical impact of 10g;
electromagnetic compatibility fully complies with IEC 61000-6-2 industrial EMC standard, with strong suppression ability against electrostatic discharge, power grid surge, high-frequency harmonic interference and radio frequency interference in engine cabins;
the module can normally operate under 1000m altitude without power derating, and low-pressure compensation design supports polar low-pressure navigation environment.
♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦
Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.
Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.
Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!
Related models:




