Bently 3500/22M 3500/22 old and new vibration monitoring protection module

Description

he 3500/15 Power Supply can be ordered for ac or

dc input power, providing compatibility with voltage

sources worldwide. 3500/22M Line noise filters are standard.

The 3500 Rack can operate from a single

supply, or dual Power Supplies can provide

redundancy for situations which cannot

tolerate power interruption. Dual supplies

reside in the upper and lower positions of

the left-most rack slot. Redundant Power

Supplies can use with separate voltage

sources. For example, 3500/22M the primary

(bottom) supply can be operate with 120 Vac power

while the backup (upper) supply can be powered

from an uninterruptible 24 Vdc source.

Each Power Supply can individually provide power to

the entire rack and its modules. When redundant

supplies are used, one supply acts as primary power

for the rack while the other acts as a backup, 3500/22M ready

to instantly and automatically operate as the

primary rack supply without interrupting rack

functions., should the primary supply fail.

The 3500/15 Power Supply module has self

monitoring functions that allow it to determine if all

its output voltages are within specifications. The

module annunciates this via a green “Supply OK” LED

on the Power Supply’s front panel.

3500/22M Rack Interface Module/Transient Data

Interface

The Transient Data Interface (TDI) or the Rack

Interface Module (RIM) are the 3500 Rack’s primary

interfaces to the configuration, display, and

condition monitoring software. Each rack requireas

one TDI or RIM, which resides in the rack slot

immediately adjacent to the Power Supply slot. 3500/22M The

TDI and RIM support a proprietary protocol used by

both the 3500 Configuration Software to configure

the rack and the 3500 Operator Display Software to

retrieve rack data and statuses. TDI provides a direct

interface with GE’s Bently Nevada System 1®

machinery management software without 3500/22M the need

for an external communications processor. The RIM

requires an external communications processor,

such as TDXnet™, TDIX, or DDIX to interface to Data

Manager® condition monitoring software.

The System OK relay1 is located within the TDI/RIM’s

I/O module. It is driven by NOT OK conditions within

the TDI/RIM itself and within other modules in the

rack.

3500/22M The TDI and RIM supply “self monitoring” functions

both for themselves and for the rack, in addition to

those provided by the individual monitor, relay,

communications, and other modules. While the

TDI and RIM provide certain functions common to

the entire rack, neither is part of the critical

monitoring path and has no effect on the proper,

normal operation of the overall 3500 System or its

machinery protection functions.

The TDI and RIM provide 4 front-panel LEDs as

follows:

OK

Indicates that the Rack Interface Module and its I/O

modules are operating correctly.

TX/RX

Flashes at the rate that communications between

the RIM and other rack modules are occurring.

TM

Indicates when the rack is in the Trip Multiply mode.

CONFIG

OK

Indicates that any module in the rack is not

configured or has a configuration error; that the

stored configuration of the Rack Interface Module

does not match the physical configuration of the

rack; or that a security option condition was not

met.

System configuration is secured by means of a

keylock switch on the front of the TDI/RIM

and two levels of software password

protection, preventing unauthorized

changes to or tampering with the

configuration. Both the TDI and the RIM

can be connected to a portable

computer via a front-panel serial

communications port for local changes

to configuration. The RIM can also be

permanently connected to a

configuration workstation via a rear

panel serial communications port, or to a

remote computer via an optional modem

I/O module. The TDI provides permanent

system connectivity via Ethernet ports.

3500/22M The TDI/RIM provides a front-panel DIP

switch that permits the user to assign a

unique rack address when multiple 3500

racks are networked with one another.

The TDI/RIM provides a system reset switch on the

front panel, allowing the user to clear any latched

alarms in the system as well as latched NOT OK

conditions. An I/O module provides a set of rear

panel connections as well, allowing users to

remotely activate this switch.

For Triple Modular Redundant (TMR) applications,

the 3500 System requires a TMR version of the

TDI/RIM (refer to the TMR section of this datasheet

for additional information).

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 180 6092 3929
Mail: 2235954483@qq.com
Contact: Chen