Name: 8V1180.00-2 8V1320.001 B&R
Price: 7632 CNY
Availability: InStock

Description

B&R Industrial Automation Components‌

‌Models:‌ 8V1180.00-2 (24V DC Power Supply) + 8V1320.001 (Digital I/O Module)

Critical Installation Precautions

‌Power Safety‌
- ‌Input Voltage:‌ Verify 120-240V AC range (L/N/PE terminals)
- ‌Inrush Current:‌ 65A peak (use Class T fuse ≥10A)
- ‌Grounding:‌ ≤0.1Ω chassis-ground resistance required
‌Environmental Limits‌

Parameter Specification

Operating Temp -25°C to +60°C (derate 2.5%/°C >55°C)

Humidity 5-95% non-condensing

Altitude ≤2000m (derate 1%/100m above)
‌Electromagnetic Compatibility‌
- ‌Installation:‌
  • Maintain 150mm clearance from high-frequency devices
  • Use shielded cables (braid coverage ≥85%)
- ‌Filtering:‌ Install ferrite cores (Z≥100Ω @ 100MHz) within 50mm of connectors

Wiring Requirements

plaintextCopy Code

[Power Connections - 8V1180.00-2]

Terminal   Function          Wire Gauge

1/L         Phase            1.5-4mm²

2/N         Neutral

3/PE        Protective Earth (Mandatory)

[I/O Wiring - 8V1320.001] Terminals Type Protection X1:1-8 Sink Inputs Transient suppressor (24V DC) X2:9-16 Relay Outputs RC snubber (0.1µF + 100Ω)

Operational Constraints

‌Load Limitations:‌
- Max. capacitive load: 100µF per output (8V1320.001)
- Min. load current: 10% rated (0.4A for 4A outputs)
‌Switching Frequency:‌
• Resistive loads: ≤5Hz
• Inductive loads: ≤0.5Hz (L/R time constant <10ms)

Maintenance & Diagnostics

‌Status Indicators‌

LED 8V1180.00-2 8V1320.001

Green (PWR) Input voltage OK Module operational

Red (ERR) Output overload Short circuit

Yellow (COM) N/A Fieldbus active
‌Recovery Procedures‌
- ‌Overload Shutdown:‌
  1. Disconnect AC input
  2. Wait 3min for capacitor discharge
  3. Reset via front button (hold 5s)
- ‌Fieldbus Fault:‌
  • Check termination resistance (110Ω at bus ends)

Safety Compliance Requirements

plaintextCopy Code

Standard                 Certification      Requirement

IEC 61131-2             cULus (E209806)    Reinforced insulation

EN 61800-5-1            SIL 2              Dual-channel monitoring

EN 60204-1              CE                 Emergency stop circuit

8V1180.00-2 8V1320.001 B&R PDF
8AC122.60-3

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!