8200-177 PLC Module by WOODWARD

Description

8200-177 PLC Module by WOODWARD

Brand:Woodward
Model:8200-177

Woodward’s Graphical Application Program (GAP™) is used to custom program Woodward’s MicroNet™ and Atlas controllers. The GAP install software may be downloaded from the Woodward website for free and can be copied multiple times but does not function unless a software license is purchased for each computer (seat) that it is to be used on. Additional GAP programmer platforms include Flex***, LECM, 2301E, 723, 733, 828, etc. Each listed seat license price below includes one seat license (authorization serial number), which can only be used on one computer.

• This seat license is used to authorize the GAP on any one computer.
• The GAP Install Program must be downloaded from Woodward’s website before the received program authorization serial number can be used to authorize its use on that computer.
• An un-activated version of the Monitor-GAP service tool program is also installed on the target computer during a GAP program install. This Monitor-GAP service tool program can then be activated/authorized by purchasing a Monitor-GAP license (refer to information listed below).
• Woodward’s Monitor-GAP service tool program is also installed during GAP programmer installation program and can be authorized and utilized with this program.

No license is necessary for the GAP-Read-Only software program functionality. When a GAP Programmer program is installed on a computer without an authorization serial number, the program functions as a Read Only GAP program or as a Demo GAP program.The GAP Programmer Install Program must first be downloaded from Woodward’s website onto the desired computer, before it can be used as a Read-Only or Demo based GAP program.
*Documentation: Product Spec: 03377, Manuals: Included in GAP Program.

 

8200-177 PLC Module by WOODWARD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8200-177 PLC Module by WOODWARD

 

This license is used to authorize the Developer functionality in ToolKit, and only includes a program authorization serial number for one computer (seat).
• ToolKit is a licensed software development program used to create Service Tools and Service and Configuration tools for Woodward electronic controllers 2300, 723, 733, LECM, Atlas, and MicroNet via Woodward’s Servlink protocol over RS-232/-422/-485 serial, CANOpen, XCP, Ethernet.
• Upon purchasing the developer license, you will be given a serial number. It is important that you keep this number, as it is your proof that you own the license.                                                                                                                                                                                                                                                                  • The AppManager install program must be downloaded from Woodward’s website and onto the desired computer before the received program authorization serial number can be used to authorize its use on that computer.
• The datalog retrieval functionality performs automatic archiving of datalog files generated on one or more controls connected by a network. The collected files are given unique names based upon the original file name, the last time of modification, and the source control.                                                                                  • This seat license is used to authorize a NetSim Basic Software program, and only includes a program authorization serial number for one computer (seat).
• The nVe Control Executive program (PN 9928-1363) must first be downloaded from Woodward’s website onto the desired computer before the received program authorization serial number can be used to authorize its use on that computer.
• NetSim nVe Nodes Only license is a simulation service tool that allows GAP application programs to be run and tested on a computer before they are downloaded into the control. With this license, once a GAP application program has been created it can then be executed to simulate the open-loop control operation (internal recycler mode). Training is available to utilize GAP-to-GAP modeling techniques to achieve closed-loop control operations with NetSim nVe.
• The supported hardware platforms are MicroNet controllers.
• Supports GAP programmed hardware platforms.
• The NetSim basic program is only compatible with GAP programs using coder 2.08 and higher coder programs. Contact the Woodward technical assistance group for training.

 

8200-177 PLC Module by WOODWARD

VariStroke Selection Procedure:
1. Create VariStroke model number by using information from Figure 5-1 below.
2. Use the VariStroke Sizing Tool as necessary to select the correct size cylinder for the application. The VariStroke Sizing Tool is available from FTC\\servf10\saleskit\Actuation\VariStroke directory or via e-business.
3. Use the developed VariStroke model number from step #1 and the below VariStroke part number table to select the correct internal VariStroke part number.
4. If an internal VariStroke part number does not exist for the required model number, contact our sales team to have a part number created.
*Documentation – VS-I: Product Spec: 03397, Manual: 26727, Maintenance: CMM-03002
*Documentation – VS-GI: Product Spec: 03464, Manual: 35119
*Documentation – VS-DX: Product Spec: 03463, Manual: 35132
*Documentation – VS-II: Product Spec: 03378, Manual: 26740, Maintenance: CMM-03006

 

 

8200-177 PLC Module by WOODWARD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8200-177 PLC Module by WOODWARD                                                                                                                                                                                                                                                                                                                                                                                                                                           MARINE Packages                                                                                                            Part Number
easYgen-3500-5/P1-MARINE additional BV & DNV                                            8440-2047
easYgen-3500-1/P1-MARINE additional BV & DNV                                            8440-2046
easYgen-3400-5/P1-MARINE additional BV & DNV                                            8440-2045
easYgen-3400-1/P1-MARINE additional BV & DNV                                            8440-2044
Documentation: Product Spec: 37533, Manual: 37531
Backpanel version 1 breaker
LS-511-5/P1-MARINE additional DNV and BV                                                    8440-2077
LS-511-1/P1-MARINE additional DNV and BV                                                    8440-2076
Documentation: Product Spec: 37545, Manual: 37542
Display version 1 breaker
LS-521-5/P1-MARINE additional DNV and BV                                                    8440-2075
LS-521-1/P1-MARINE additional DNV and BV                                                    8440-2074
Documentation: Product Spec: 37545, Manual: 37542
RP-3000 Marine
RP-3000-MARINE additional DNV and BV                                                         8446-1046
Documentation: Product Spec: 37446, Manual: 37534

 

 

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

 

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

 

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!

Related models:

UFC721BE101 3BHE021889R0101

UFC760BE01 3BHB007030R0001

UFC760BE143 3BHE004573R0143

UFC760BE41 3BHE004573R0041

UFC760BE42 3BHE004573R0042

UFC762AE101 3BHE006412R0101

UFD203A101 3BHE019361R0101

UMB015BE02 HIEE400995R0002

UNITROL 1005-0011 ECO 3BHE043576R0011

UNITROL 1010 3BHE035301R1002

UNITROL 1020 3BHE030579R0003

UNITROL 1020 3BHE030579R0003 UNS0119A-Z,V1 3BHE030579R0001

UNITROL1000 B-Z V104 3BHE014557R6104

UNITROL1000 Z.V3 3BHE014557R0003

UNS0880A-P,V1 3BHB005922R0001

UNS0883A-P,V1 3BHB006208R0001