Name: 5069-L350ERMK Allen-Bradley PLC Controller
Price: 6554 CNY
Availability: InStock

Description

5069-L350ERMK Allen-Bradley PLC Controller

🔧 Core Specifications

‌Processor & Memory‌:
5.0MB standard memory with 2.5MB safety memory (SIL2/PLd certified), supporting real-time control and motion applications.9
‌Communication‌:
Dual-port EtherNet/IP interface (10/100 Mbps), compatible with ControlNet and DeviceNet protocols for industrial network integration.36
‌I/O Capacity‌:
Supports up to 31 I/O modules with high-speed backplane communication for rapid data transfer.79
‌Physical Dimensions‌:
170mm × 125mm × 163mm, operating temperature range: 0–60°C.1

️ Key Features

‌Safety & Security‌:

SIL2/PLd safety certification for critical applications.9
CIP Security™ standard for encrypted data transmission.36

‌Motion Control‌:

Native motion coordination for servo drives (e.g., Kinetix series), supporting multi-axis synchronization.69

‌Software Compatibility‌:

Programmable via Rockwell’s Studio 5000 Logix Designer® with support for Ladder Logic, Function Block, and Structured Text.68

‌Expansion Options‌:

Compatible with 5069 Compact I/O modules (e.g., 5069-IB16, 5069-IF8) for analog/digital I/O extension.78

Applications

Industrial automation in manufacturing lines, energy systems, and water treatment plants.46
Motion-centric applications like robotics and conveyor control.69

🔍 Maintenance & Troubleshooting

‌Diagnostics‌: Front-panel LEDs for status monitoring (e.g., network activity, fault alerts).67
‌Firmware Updates‌: Deployable via Studio 5000 or ControlFLASH™ utility.6
‌Environmental Resilience‌: IP20-rated enclosure for dust protection; avoid exposure to moisture/corrosive agents.16

ℹ️ For detailed wiring diagrams and programming examples, refer to the official CompactLogix 5380 Technical Specifications manual (Rockwell Automation Doc ID PUBxxxx-EN-P).

5069-L350ERMK Allen-Bradley PLC Controller

The following is a full process guide for the installation and configuration of the 5069-L350ERMK Allen Bradley PLC controller, integrating key steps for hardware installation, software configuration, and network setup:

🔧 1、 Hardware installation
Install guide rail fixation
Use standard DIN rails (35mm width) to vertically install the PLC controller, ensuring that the bottom heat dissipation space is ≥ 50mm1.
Tightening torque: Install screws with a torque of 0.5-0.6 N · m to avoid deformation caused by over tightening.
Module extension connection
Connect the I/O module (such as 5069-IB16 digital input module) through the integrated slot on the back, align the rail buckle when inserting until the locking sound sounds 14.
Supports up to 31 expansion modules, with a total length not exceeding the backplane communication limit of 49.
Power supply and grounding
Power input: 24V DC ± 10%, use twisted pair shielded wire to connect power terminal (L+/M) 1.
Grounding resistance: The impedance of the chassis grounding wire should be ≤ 1 Ω, and the independent grounding point should avoid sharing 28 with the power cable.
💻 2、 Software Configuration (Studio 5000 Environment)
Create a new project
Open Studio 5000 Logix Designer ® → New Project → Select Controller Model “5069-L350ERMK” → Set Firmware Version (e.g. V30.011) 36.
Communication driver configuration
Connected via EtherNet/IP:
Control panel → Set laptop IP to be on the same network segment as PLC (e.g. PLC default IP: 172.16.10.1, laptop set to 172.16.10.100) 311.
Scan the device in Studio 5000 → select PLC → download the project to Controller 36.
Programming and Logic Deployment
Supporting programming languages: Ladder Logic, Function Block Diagram (FBD), or Structured Text (ST) 6.
Key steps: Initialize safety configuration (SIL2/PLd) and set safety logic lock 49 in Safety Tasks.

5069-L350ERMK Allen-Bradley PLC Controller PDF

5069-L350ERMK

5069-L350ERMK Allen-Bradley PLC Controller

Safety and Debugging Precautions
Environmental protection: The controller has an IP20 protection level and is prohibited from being exposed to humid and dusty environments. The installation cabinet requires forced air cooling (temperature ≤ 60 ℃)
First power on inspection:
Confirm OK, green light stays on → RUN mode LED flashes → Monitor I/O status 68 through Studio 5000.
Fault diagnosis:
Red FAULT light on: Check for program logic errors or module communication interruptions (use the Diagnostics tab to view detailed alerts)

♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!