Name: 3IP161.60-1 B&R CPU Module
Price: 2317 CNY
Availability: InStock

Description

1 Key Features

Modular design for easy integration and expansion

Wide input/output compatibility with industrial signal standards

High electromagnetic compatibility (EMC) compliance (EN 61000-6-2/3)

Operating temperature range: -25°C to +70°C (ambient)

Protection rating: IP20 (control module) / IP54 (optional front panel)

Support for PROFINET/PROFIBUS communication (configurable)

Built-in self-diagnostic function for fault detection

Low power consumption (≤15 W typical)

Safety Precautions

To prevent equipment damage, personal injury, or system malfunctions, strictly adhere to the following safety requirements during installation, operation, and maintenance:

Comply with local electrical safety codes (e.g., IEC 60204-1) and fire safety standards.

Disconnect all power sources before wiring, installing, or servicing the module.

Ensure the supply voltage matches the module’s rated input (24 VDC ±10% or 110/230 VAC, see Section 9 for details).

Use only approved cables and accessories (conforming to VDE 0295 or IEC 60227 standards).

Ground the module properly (protective earth resistance ≤4 Ω) to avoid electric shock and electromagnetic interference.

Do not operate the module in explosive atmospheres (unless certified for ATEX zones) or environments exceeding rated temperature/humidity limits.

Unauthorized modification of the module’s hardware or software voids the warranty and may cause safety hazards.

Installation

3.1 Installation Preparation

Tools Required: Screwdriver (PH2 cross-head), torque wrench (4–6 N·m), wire stripper, multimeter, and level gauge.

Pre-Installation Check: Verify the module model (3IP161.60-1) matches the order, and inspect for physical damage (e.g., cracks, loose connectors) during transportation.

Environmental Requirements: Install in a control cabinet with ambient temperature -25°C to +70°C, relative humidity 5–95% (non-condensing), and free from dust, corrosive gases, or excessive vibration (≤5 g, 10–500 Hz).

3.2 Mounting Steps

Align the module with the DIN rail (35 mm, EN 50022 standard) in the control cabinet.

Insert the top of the module into the DIN rail and press down firmly until it locks into place (audible “click”).

Secure the module with a locking screw (if provided) to prevent displacement due to vibration (torque: 4 N·m).

Ensure a minimum clearance of 10 mm between adjacent modules for ventilation; avoid blocking cooling vents.

Confirm the module is level and securely fastened before proceeding to wiring.

Wiring Instructions

Cable Specifications

Power supply cables: 1.0–1.5 mm² cross-section, copper conductor, rated voltage ≥450/750 V.

Signal cables: Shielded twisted-pair (STP) cables (AWG 22–24), rated voltage ≥300/500 V, to minimize EMI.

Communication cables: PROFINET/PROFIBUS-specific cables (conforming to EN 50170/50173) with maximum length ≤100 m (PROFINET) or ≤1200 m (PROFIBUS).

5. Configuration & Calibration

5.1 Configuration Tools

Compatible software: Siemens TIA Portal (V15+) or manufacturer-specific configuration tool.

Communication interface: USB-to-PROFINET/PROFIBUS adapter (for PC connection).

5.2 Basic Configuration Steps

Install the configuration software and connect the PC to the module via the communication port.

Power on the module and establish a connection in the software (select “3IP161.60-1” from the device library).

Configure input/output parameters:

Analog inputs: Select signal type (4–20 mA), scaling range (e.g., 0–100 bar for pressure sensors).

3IP161.60-1 PDF
3IP161.60-1

♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦♦…♦

Shipping:
1. Your item will be shipped to all countries via EMS, unless one country cannot be shipped via EMS. We will choose DHL, UPS, or FedEx. Please leave us your phone number.
2. We will ship the product to you on the same day or within 1-2 working days after receiving your payment. The shipping time depends on the country/region where you reside, the customs and habits of your country/region, and especially during peak hours.
3. Assuming (assuming) that the item requires payment of tariffs from your country, the buyer is obligated. We are not responsible for any taxes or customs fees in your country/region.

Return Policy:
1. Please contact us before returning the item.
2. The buyer should inform the seller of all returned items within 7 days after receiving the package. We reserve the right to reject any request to inform the seller for more than 7 days.
3. Returned products must have all original packaging and be in good condition.

Response policy:
If you are satisfied with the purchase, please leave us an active response.
2. If you have any questions about the outcome of the transaction or product, please contact us first and we will do our best to satisfy you!
3. Please do not reply with negative feedback before contacting us!