07KT97F1 07KT97H3 ABB Controller module motor card inventory

Description

07KT97F1 07KT97H3 ABB Controller module motor card inventory

General Information

Extended Product Type                               07KT97F1

Product ID                                                              1SBP260511R1001
ABB Type Designation                                   07KT97F1

Catalog Description                                           07KT97F1:AC31,PLC 8DI/6DO-Rel., 34kB.24VDC
Long Description                                                 07KT97F1:AC31,PLC 8DI/6DO-Trans.34kB, 24VDC, Spring

Additional Information

ABB Type Designation                                                     07KT97F1
Ambient Air Temperature                                                      Operation 0 … +55 °C
Storage -40 … +75 °C

07KT97F1 07KT97H3 ABB Controller module motor card inventory

07KT97F1 07KT97H3 ABB Controller module motor card inventory

Battery Type                                                                          Portable
CN8                                                                                      85371091
Country of Origin                                                                 France (FR)
CS31-Bus                                                                            1
Customs Tariff Number                                                      85389099
Data Sheet, Technical                                                       1SBC260400R1001
Information
Declaration of Conformity                                                         1SBD240550C1000
– CE
DNV Certificate                                                                                DNV_A-8389
Environmental Information                                                               1SBD240011E1000
Frame Size                                                                                       Undefined
Gross Weight                                                                                      0.35 kg
Instructions and Manuals                                                                 1SBC260400R1001

07KT97F1 07KT97H3 ABB Controller module motor card inventory

The CS 31 bus is a RS 485 serial interface and consists of a shielded twisted pair.  07KT97F1s a master slave bus and only accepts a single master.Use a AWG 24 (0.22 mm2) to AWG 18 (0.18 mm2) twisted pair.The maximum length is 500 m.The same cable type should be used for the whole system bus setup.
Bus interruptions should be avoided, during cabinet cable connections for instance, otherwise it should be cabled to the same side of the terminal block (see Figure 4-3 and Figure 4-4).The relay outputs may be protected externally against parasites generated by an inductive load with:
– a varistor or an RC module, in alternating current
– a free-wheel diode, in direct current
07KR31 of an external thermal fuse, connected to the common power supply of the outputs, protects to the output connected devices.The transistor outputs are protected internally against short circuits and overloads. However with an inductive load, with L/R greater than 40 ms, it is necessary to add a free-wheel diode.If an error occurs at one of the transistor outputs, it is indicated by the status of the central unit.The presence of an external thermal fuse,   07KT97F1connected to the common power supply of the outputs, protects the output connected devices and also avoids unit damage should numerous outputs overload.
Warning: In the case of the terminal  07EA90-SI is disconnected and in the same time the 24 V d.c. is connected, the leakage current on output is 16 mA.

07KT97F1 07KT97H3 ABB Controller module motor card inventory

07KT97F1 07KT97H3 ABB Controller module motor card inventory

The master central unit, as well as the remote units, may be positioned in any order on the bus. The order of the extensions on the central units and remote extensible units is free.The addressing is not according to the order of the units on the bus. The addresses from 1 to 61 may be attributed in any order to the slaves: the first remote unit on the CS 31 bus can have address 5 followed by a remote unit with address 3 followed by another remote unit with address 12, and so on.When an analog extension unit is present amongst the extensions, the unit takes the same address value as that of the extensible remote unit to which it is associated.Address values = ( 0 ≤ X ≤ 61 ) When an XM 06 B5 type analog extension unit is used, 07KT97B is possible to associate a maximum of two units to the extensible remote unit, because the number of inputs and outputs of this unit is less than eight.- LD and Quick LD: are graphic languages based on the symbols of contact diagrams. They are adapted for combinatorial processing and offer the basic symbols and automation function blocks as defined in the IEC 1131-3 standard (contacts, timers, counters).  07KT97F1 is a graphical language of function blocks which allows complex procedure programming by combining existing library functions of the  07KT97F1 software.- SFC: is a graphical language for describing sequential operations .  07KT97F1 is represented by diagrams which represent steps linked with transitions which correspond to a binary condition. The actions associated with the steps may be written in a different language. – IL: an instruction list language. This is particularly aimed at the more experienced automaticians.

07KT97F1 07KT97H3 ABB Controller module motor card inventory pdf

20211025112650_10682

07KT97F1 07KT97H3 ABB Controller module motor card inventory

Related models: